
ESP Racer 2025.kicad pcb imposition
plenprojectcompany/ESPRacer-webapp
ESPRacer for WebApp | PLEN Project Company Inc. ===============================================================================

ESPRacer for WebApp | PLEN Project Company Inc. ===============================================================================
ESP Racer 2025 is an open-source printed circuit board by plenprojectcompany, from the plenprojectcompany/ESPRacer-webapp repository on GitHub. It is a 2-layer board of 20 × 35 mm with 23 parts on 28 nets, routed with 290 tracks and 74 vias.
It is built around the ESP32-C3-WROOM-02-H4, XCL102D333CR-G and IRLML6402. Its parts include 7 resistors, 5 capacitors, 4 ICs, 4 connectors and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.
This software is released under the MIT License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R7 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5 |
| 2 | 300 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | Conn_LED_1 | Molex:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J1 |
| 1 | Conn_LED_2 | Molex:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J2 |
| 1 | Conn_Servo | Molex:Molex_PicoBlade_53047-0310_1x03_P1.25mm_Vertical | J3 |
| 1 | Conn_USB | Original:Serial | J4 |
| 1 | DRV8835DSST | DRV8835DSST:SON50P300X200X80-13N | U1 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U3 |
| 1 | IRLML6402 | IRLML6402:SOT23 | Q3 |
| 1 | LOGO | Logo:PLEN | G*** |
| 1 | SFV12R-2STE1LF | SFV12R-2STE1LF:FCI_SFV12R-2STE1LF | U2 |
| 1 | Status | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | XCL102D333CR-G | XCL102D333CR-G:XCL103D503CRG | IC1 |

plenprojectcompany/ESPRacer-webapp
ESPRacer for WebApp | PLEN Project Company Inc. ===============================================================================

lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script


KaiPereira/Cheetah-MX4-Mini
A powerful yet compact 3D printer motherboard that supports TMC stepsticks, fans, heaters, screens and thermistors





DoImant/TP4056-Power-Path-PCB
TP4056 Power Sharing PCB. Charge battery despite connected load.
It measures 20 × 35 mm and has 2 copper layers, 1 mm thick.
23 parts, built around the ESP32-C3-WROOM-02-H4, XCL102D333CR-G and IRLML6402. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the plenprojectcompany/ESPRacer-webapp repository on GitHub, at the commit this page was made from: the board is circuit/ESP_Racer_2025/ESP_Racer_2025.kicad_pcb and its schematic circuit/ESP_Racer_2025/ESP_Racer_2025.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask plenprojectcompany before reusing the design.