
Main Control Board
baoqi-zhong/Awesome-SMT-Machine
A single head 🔥SMT Machine🔥 based on FOC stepper motors. Pure self-developed and fully open-sourced.

Re G431 is an open-source printed circuit board by Pledoge, from the Pledoge/G431-Board repository on GitHub. It is a 2-layer board of 77 × 44 mm with 106 parts on 90 nets, routed with 624 tracks and 373 vias.
It is built around the TJA1042T/3/1J, CH340N and RY8411, with the SMCJ28A, K34 and SMF3V3A among its other parts. Its parts include 31 resistors, 28 capacitors, 18 connectors, 13 diodes and 5 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 120R | Resistor_SMD:R_0603_1608Metric | R2, R4, R5, R10, R12, R14, R15, R16, R22, R23, R24, R25, R26, R30, R31 |
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C8, C11, C13, C14, C15, C16, C20, C22, C26, C27 |
| 8 | Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3, J4, J5, J8, J17, J18 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R6, R13, R28, R29 |
| 5 | 10u | Capacitor_SMD:C_1206_3216Metric | C1, C2, C12, C28, C29 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C6, C18 |
| 3 | 20p | Capacitor_SMD:C_0603_1608Metric | C7, C9, C10 |
| 3 | 2k2 | Resistor_SMD:R_0603_1608Metric | R9, R32, R33 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D3, D4, D5 |
| 2 | 100u | Capacitor_SMD:C_1206_3216Metric | C30, C31 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C17, C21 |
| 2 | 33R | Resistor_SMD:R_0603_1608Metric | R18, R19 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R20, R21 |
| 2 | Barrel_Jack_Switch_Pin3Ring | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J6, J15 |
| 2 | Conn_01x04_MountingPin | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J11, J13 |
| 2 | Fuse | Fuse:Fuse_Littelfuse-NANO2-451_453 | F1, F3 |
| 2 | LED_Blue | LED_SMD:LED_0603_1608Metric | D10, D11 |
| 2 | SMCJ28A | Diode_SMD:D_SMC | D6, D13 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 1A 1206 | Fuse:Fuse_1206_3216Metric | F2 |
| 1 | 1m | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 240k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 25Mhz_3225 | Crystal:Crystal_SMD_SeikoEpson_FA238V-4Pin_3.2x2.5mm | Y1 |
| 1 | 3k3 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 54k6 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 6u8 | Inductor_SMD:L_Sunlord_MWSA0402S | L1 |
| 1 | BTN0 | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | BTN1 | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | CAN1 | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J14 |
| 1 | CH340N | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Conn_01x04_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | Conn_01x07_Pin | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J19 |
| 1 | K34 | Diode_SMD:D_SMF | D9 |
| 1 | PWROut | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J7 |
| 1 | RS3236 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | RY8411 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | SMA5V0A | Diode_SMD:D_SMA | D1 |
| 1 | SMF3V3A | Diode_SMD:D_SMF | D7 |
| 1 | SMF5.0A | Diode_SMD:D_SMF | D12 |
| 1 | SMF5V0A | Diode_SMD:D_SMF | D8 |
| 1 | SS54 | Diode_SMD:D_SMA | D2 |
| 1 | STM32G431CBUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | SWD | Connector_Molex:Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J9 |
| 1 | TJA1042T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J10 |

baoqi-zhong/Awesome-SMT-Machine
A single head 🔥SMT Machine🔥 based on FOC stepper motors. Pure self-developed and fully open-sourced.


Aiyin4Da-2/Main_Ctrl_H7
STM32H723VGT6 MainCtrlBoard Author: Aiyin4DaGLD · Hardware: v1.2 · Updated: 2026-08-21

htsong-lab/hardware
Hardware engineering portfolio: FPGA high-speed board, RoboMaster power electronics and smart-car projects.



hkustenterprize/RM2025-Wireless-JLink
Wireless JLink-OB based on Allwinner V3S

It measures 77 × 44 mm and has 2 copper layers, 1.6 mm thick.
106 parts, built around the TJA1042T/3/1J, CH340N, RY8411 and SMCJ28A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Pledoge/G431-Board repository on GitHub, at the commit this page was made from: the board is re-G431.kicad_pcb and its schematic re-G431.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Pledoge before reusing the design.