2 layers288.8 × 160.1 mm
GRAM SLIM
GRAMCTRL/GRAM-SLIM
Open source low-profile leverless design with an integrated RP2040.
64 parts24GPL-3.0
2 layers347.1 × 156.5 mm
ICOF1
plants-tech/ICOF1icof1
- Size
- 347.1 × 156.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 67
- Pads
- 394
- Tracks, vias
- 689, 142
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 26 Feb 2023
- Updated
- 27 Jun 2023
Overview
ICOF1 is an open-source printed circuit board by plants-tech, from the plants-tech/ICOF1 repository on GitHub. It is a 2-layer board of 347.1 × 156.5 mm with 77 parts on 67 nets, routed with 689 tracks and 142 vias.
It is built around the RP2040, W25Q128JVSIQ and USBLC6-2SC6, with the XC6206-2.8V among its other parts. Its parts include 21 switches, 17 capacitors, 10 resistors, 4 ICs and 3 diodes. It belongs with the RP2040 boards of this library.
Main components
4
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
XC6206-2.8V
SOT-23-3L-40℃~+85℃@(Ta) 1 1uA 2.8V 250mA 350mV@(30mA) 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdICOF1
Integrated RP2040 Circuit Open Frame 1 PCB Design
utilizes default haybox and pico-rectangle pinout
big thanks to Cubs, Quark, Bjart, and Greggy Turbo
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | @HOLE0, @HOLE1, @HOLE2, @HOLE3, @HOLE4, @HOLE5, @HOLE6, @HOLE7, @HOLE8, @HOLE9, @HOLE10, @HOLE11, @HOLE12, @HOLE13, @HOLE14, @HOLE15 | ||
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C5, C6, C11, C12, C13, C14, C15, C16, C17 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C10 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | Schottky Diode | qw-footprints:CUSTOM D_SOD-123 | D1, D2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 470 | phlob2000020000:R_0402_1005Metric | R4 |
| 1 | 5.6k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 500 mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | A | marbastlib-mx:SW_MX_HS_1u_Htangl | SW38 |
| 1 | B | marbastlib-mx:SW_MX_HS_1u_Htangl | SW21 |
| 1 | Boot | bootsel:SW_SPST_SKQG_WithStem | SW1 |
| 1 | C_DN | marbastlib-mx:SW_MX_HS_1u_Htangl | SW36 |
| 1 | C_LT | marbastlib-mx:SW_MX_HS_1u_Htangl | SW32 |
| 1 | C_RT | marbastlib-mx:SW_MX_HS_1u_Htangl | SW40 |
| 1 | C_UP | marbastlib-mx:SW_MX_HS_1u_Htangl | SW35 |
| 1 | Down | marbastlib-mx:SW_MX_HS_1u_Htangl | SW8 |
| 1 | Green_LED | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | L | marbastlib-mx:SW_MX_HS_1u_Htangl | SW4 |
| 1 | LOGO | LOGO | G |
| 1 | LS | marbastlib-mx:SW_MX_HS_1u_Htangl | SW17 |
| 1 | Left | marbastlib-mx:SW_MX_HS_1u_Htangl | SW6 |
| 1 | M1 | marbastlib-mx:SW_MX_HS_1u_Htangl | SW28 |
| 1 | M2 | marbastlib-mx:SW_MX_HS_1u_Htangl | SW30 |
| 1 | MS | marbastlib-mx:SW_MX_HS_1u_Htangl | SW19 |
| 1 | R | marbastlib-mx:SW_MX_HS_1u_Htangl | SW12 |
| 1 | RP2040 | qw-footprints:RP2040-QFN-56 | U3 |
| 1 | Right | marbastlib-mx:SW_MX_HS_1u_Htangl | SW10 |
| 1 | Start | marbastlib-mx:SW_MX_HS_1u_Htangl | SW3 |
| 1 | Tag-Connect TC2030 | marbastlib-various:CON_TC2030_outlined | J2 |
| 1 | UP | marbastlib-mx:SW_MX_HS_1u_Htangl | SW26 |
| 1 | USB C Connector | qw-footprints:TYPE-C_24P_QCHT | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | X | marbastlib-mx:SW_MX_HS_1u_Htangl | SW22 |
| 1 | XC6206 | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | Y | marbastlib-mx:SW_MX_HS_1u_Htangl | SW14 |
| 1 | Z | marbastlib-mx:SW_MX_HS_1u_Htangl | SW25 |
The 76 most common of 77 parts.
Questions
How big is the ICOF1 PCB?
It measures 347.1 × 156.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ICOF1 use?
77 parts, built around the RP2040, W25Q128JVSIQ, USBLC6-2SC6 and XC6206-2.8V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ICOF1 KiCad files?
From the plants-tech/ICOF1 repository on GitHub, at the commit this page was made from: the board is KiCad/ICOF1.kicad_pcb and its schematic KiCad/ICOF1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ICOF1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask plants-tech before reusing the design.
Similar boards
- 2 layers347 × 156.5 mm
Integrated OF1
quark-works/Integrated-OF1
Design files are available in this repository. Production files for JLCPCB in the releases page. Tested working and fitting previously mentioned Frame 1 cases.
81 parts11MIT - 2 layers203.3 × 221.2 mm
Panelized Board
GRAMCTRL/GRAM-PRISM
A modular and scalable design based on WunWae's Prism Controller
87 parts10GPL-3.0 - 2 layers38.1 × 49.2 mm
OpenRectangleTemplate
quark-works/OpenRectangleTemplate
RP2040 template for use with box style controllers for the GC
40 parts9MIT - 2 layers339.1 × 141.2 mm
OpenRectangle
quark-works/OpenRectangle
Custom PCBs for a RP2040 powered rectangle controller
92 parts8MIT - 2 layers188 × 190.2 mm
- 2 layers304 × 149 mm
Tiebox
quark-works/tiebox
Labels are already assigned to the default pinout of the most popular firmware available as well as in stock parts for every component from LCSC.
90 parts1 - 4 layers109.5 × 65 mm
