Pl0p/Modular_Synth33Here you can find all the resources I use to build my modules. You will also find my modules, their Kicad files, their schematics as well as my sources of inspiration and pictures/videos of the prototypes and finished…
Controls is an open-source printed circuit board by Pl0p, from the Pl0p/Modular_Synth repository on GitHub. It is a 2-layer board of 55.6 × 105.5 mm with 13 parts on 16 nets, routed with 64 tracks and 0 vias.
Its parts include 6 connectors, 1 diode and 1 switch.
Here you can find all the resources I use to build my modules. You will also find my modules, their Kicad files, their schematics as well as my sources of inspiration and pictures/videos of the prototypes and finished modules
You will also find
All modules in the list are not necessarily in eurorack format, but all have their schematics available if not more
And
These are the module's files and descriptions available in the list above but classified by category
Don't hesitate to participate if you find other sources of music/video schematics
Thing you can do to help :
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Accent | Drum-K:Jack_3.5mm_Vertical | J3 |
| 1 | B100k Decay | Drum-K:Potentiometer_Alps_RK09L_Single_Vertical | RV5 |
| 1 | B100k Disto | Drum-K:Potentiometer_Alps_RK09L_Single_Vertical | RV2 |
| 1 | B10k Level | Drum-K:Potentiometer_Alps_RK09L_Single_Vertical | RV3 |
| 1 | B10k Tone | Drum-K:Potentiometer_Alps_RK09L_Single_Vertical | RV1 |
| 1 | B50k Tune | Drum-K:Potentiometer_Alps_RK09L_Single_Vertical | RV4 |
| 1 | CV | Drum-K:Jack_3.5mm_Vertical | J5 |
| 1 | Conn_Left | Drum-K:PinHeader_1x10 | J1 |
| 1 | Conn_Right | Drum-K:PinHeader_1x10 | J2 |
| 1 | OUT | Drum-K:Jack_3.5mm_Vertical | J6 |
| 1 | Red | Drum-K:LED_D5.0mm | D1 |
| 1 | SW_Transient | Drum-K:Switch_MTS102 | SW1 |
| 1 | Trig | Drum-K:Jack_3.5mm_Vertical | J4 |
It measures 55.6 × 105.5 mm and has 2 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Pl0p/Modular_Synth repository on GitHub, at the commit this page was made from: the board is Drum-K_MKII/Kicad/Controls.kicad_pcb and its schematic Drum-K_MKII/Kicad/Controls.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Pl0p before reusing the design.
Pl0p/Modular_Synth
Here you can find all the resources I use to build my modules. You will also find my modules, their Kicad files, their schematics as well as my sources of inspiration and pictures/videos of the prototypes and finished…
Pl0p/Modular_Synth
Here you can find all the resources I use to build my modules. You will also find my modules, their Kicad files, their schematics as well as my sources of inspiration and pictures/videos of the prototypes and finished…
Pl0p/Modular_Synth
Here you can find all the resources I use to build my modules. You will also find my modules, their Kicad files, their schematics as well as my sources of inspiration and pictures/videos of the prototypes and finished…
Pl0p/Modular_Synth
Here you can find all the resources I use to build my modules. You will also find my modules, their Kicad files, their schematics as well as my sources of inspiration and pictures/videos of the prototypes and finished…
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI