2 layers20.5 × 24.8 mm
2 layers48.3 × 83.8 mm
Pluggyreloaded
pkupper/pluggyreloaded5Adapter Board for the Gigatron TTL Microcomputer
- Size
- 48.3 × 83.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 20
- Pads
- 73
- Tracks, vias
- 106, 40
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Nov 2019
- Updated
- 28 Nov 2019
Overview
Pluggyreloaded is an open-source printed circuit board by pkupper, from the pkupper/pluggyreloaded repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 48.3 × 83.8 mm with 8 parts on 20 nets, routed with 106 tracks and 40 vias.
Its parts include 5 connectors, 1 diode and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdPluggy Reloaded
Adapter Board for the Gigatron TTL Microcomputer
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 5749180-1 | 5749180-1:TE_5749180-1 | J2 |
| 1 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | GAME_CONTROLLER | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J4 |
| 1 | GIGATRON | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J3 |
| 1 | MICRO_SD_BREAKOUT | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | MISC_HEADER | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | SPARKFUN_PRO_MICRO | Boards:SPARKFUN_PRO_MICRO | B1 |
Questions
How big is the Pluggyreloaded PCB?
It measures 48.3 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pluggyreloaded use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pluggyreloaded KiCad files?
From the pkupper/pluggyreloaded repository on GitHub, at the commit this page was made from: the board is pcb/PluggyReloaded.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pluggyreloaded design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0