2 layers30 × 30 mm
ReCamera Gimbal
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
123 parts495Apache-2.0
2 layers273.3 × 102.9 mm
Editor
piroridon/Editor50540% keyboard project
- Size
- 273.3 × 102.9 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 123
- Nets
- 87
- Pads
- 602
- Tracks, vias
- 782, 170
- Pours
- 621
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Jun 2025
- Updated
- 20 Oct 2025
Overview
Editor is an open-source printed circuit board by piroridon, from the piroridon/Editor50 repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 273.3 × 102.9 mm with 123 parts on 87 nets, routed with 782 tracks and 170 vias.
Its parts include 64 diodes, 50 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
README
README.mdEditor50
"Editor50" is 40% keyboard designed for text editing, equipped with a four-way stick switch, two rotary encoders, and three push switches.
- Keyboard Maintainer: piroridon
- Hardware Supported: The PCBs, controllers supported
Make example for this keyboard (after setting up your build environment):
make editor50:defaultFlashing example for this keyboard:
make editor50:default:flashSee the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (3,3) in the matrix (stick switch push) and plug in the keyboard
- Physical reset button: Remove the top contoller cover. Hold the BOOT button and press the RESET button on the micro contoller board.
- Keycode in layout: Press the key mapped to
QK_BOOTif it is available
This keyboard project is licensed under CC0.
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 54 | D | kbd:D3_SMD_back_2 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +38 |
| 40 | SW_PUSH | kbd:chocV1_V2_socket_1 | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +24 |
| 10 | ~ | kbd:WS2812C_hand_solder | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10 |
| 8 | MountingHole | kbd:TH_M2_spacer_hex_3 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 4 | SW_PUSH | kbd:chocV1_V2_socket_1.25u_1 | SW37, SW41, SW42, SW46 |
| 3 | SW_Push | kbd:SKRAAWE010_1 | SW47, SW48, SW49 |
| 2 | RotaryEncoder_Switch | kbd:EC12D_RE | SW38, SW45 |
| 1 | RP2040-Zero_p | kbd:RP2040-Zero_SM_B_v4 | U1 |
| 1 | StickSwitch | kbd:RKJXM1015004 | SW50 |
Questions
How big is the Editor PCB?
It measures 273.3 × 102.9 mm and has 2 copper layers, 1.2 mm thick.
What parts does the Editor use?
123 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Editor KiCad files?
From the piroridon/Editor50 repository on GitHub, at the commit this page was made from: the board is PCB_data/editor/editor.kicad_pcb and its schematic PCB_data/editor/editor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Editor design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers231.8 × 158.1 mm
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
123 parts326 - 2 layers100 × 100 mm
- 2 layers89 × 55.5 mm
Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console
123 parts75CERN-OHL-W-2.0 - 2 layers97.5 × 97.5 mm
Ud29
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
123 parts59 - 2 layers100 × 100 mm
TunerSection
profdc9/ModularTuner
A Modular Antenna Tuner for a Phased Array Antenna System
123 parts59 - 2 layers321.5 × 116.7 mm
- 2 layers232.6 × 118.3 mm
Krtkus
swift502/Krtkus
Low profile 5x12 ortholinear keyboard design for choc/ks-33 switches
123 parts45CC0-1.0