
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

Rgb to hdmi is an open-source printed circuit board by pinnet, from the pinnet/newRGB2hdmi repository on GitHub. It is a 2-layer board of 65 × 30 mm with 31 parts on 53 nets, routed with 816 tracks and 52 vias.
Its parts include 6 resistors, 4 capacitors, 4 connectors, 4 switches and 2 diodes. It belongs with the lEDs and displays and interfaces and adapters boards and the FPGA and CPLD boards of this library.
RGB2HDMI multibox
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R7 |
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | , , , | |
| 4 | SW_PUSH | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2, SW3, SW4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3, C4 |
| 3 | 4K7 | Resistor_THT:R_Array_SIP6 | RN1, RN2, RN3 |
| 3 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP4 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | CONN_01X02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical_Custom | P4 |
| 1 | CONN_02X20 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical_Custom | P1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | P5 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | P2 |
| 1 | XC9572XL-VQFP44 | Package_QFP:LQFP-44_10x10mm_P0.8mm | U1 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.


It measures 65 × 30 mm and has 2 copper layers, 1.6 mm thick.
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pinnet/newRGB2hdmi repository on GitHub, at the commit this page was made from: the board is Kicad/rgb-to-hdmi.kicad_pcb and its schematic Kicad/rgb-to-hdmi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pinnet before reusing the design.