2 layers290.1 × 130 mm
2 layers39.5 × 30 mm
PiPhoneOne
pikard86/Pk-Zero- Size
- 39.5 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 47
- Pads
- 129
- Tracks, vias
- 224, 25
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jul 2023
- Updated
- 1 Jul 2023
Overview
PiPhoneOne is an open-source printed circuit board by pikard86, from the pikard86/Pk-Zero repository on GitHub. It is a 2-layer board of 39.5 × 30 mm with 32 parts on 47 nets, routed with 224 tracks and 25 vias.
It is built around the AMS1117-3.3. Its parts include 13 capacitors, 5 resistors, 4 connectors, 2 ICs and 1 diode. It belongs with the STM32 boards of this library.
Main components
1Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C6, C7, C9, C10 |
| 4 | 1k5 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R5 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C5, C8 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | I2C Connector | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | RED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_SPDT | Button_Switch_THT:SW_CuK_JS202011AQN_DPDT_Angled | SW1 |
| 1 | Serial Wire Debug Connector | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | USART Connector | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J3 |
Questions
How big is the PiPhoneOne PCB?
It measures 39.5 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PiPhoneOne use?
32 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PiPhoneOne KiCad files?
From the pikard86/Pk-Zero repository on GitHub, at the commit this page was made from: the board is PiPhoneOne.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PiPhoneOne design in my own project?
Its repository states no licence, so its author keeps all rights: ask pikard86 before reusing the design.
Similar boards
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
- 2 layers78 × 60 mm
- 2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407