Skip to the content
2 layers17 × 10 mmRF CAL, the printed circuit board in 3D

Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator

Size
17 × 10 mm
Copper layers
2
Thickness
1.09 mm
Parts
7
Nets
4
Pads
24
Tracks, vias
4, 75
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 Oct 2026
Updated
9 Oct 2026

Overview

RF CAL is an open-source printed circuit board by PicoballoonLabs, from the PicoballoonLabs/Debug-Boards repository on GitHub, published under the MIT licence. It is a 2-layer board of 17 × 10 mm with 7 parts on 4 nets, routed with 4 tracks and 75 vias.

It is built around the MM8030-2610RK0 and RT0603FRD07100RL. It belongs with the radio and wireless and sensors and measurement boards of this library.

Main components

2

README

README.md

Debug-Boards

This repository contains the hardware designs for our integrated debug probe, debug adapter, flex debug cables and RF calibration board.

📦 Contents

This repository includes designs for:

  • Flex debug cable: Flexible flat cable that connects a debugger to the low-profile debug connector on the target board.
  • Debug Adapter: SWD debug adapter board that breaks the target debug connector out to a standard debug host, with its own target power supply.
  • Integrated Debugger: Integrated debug probe for flashing and debugging target hardware over SWD, with a UART bridge and switchable target power. It is hardware compatible with the Black Magic Debug firmware.
  • RF VNA calibrator: Calibration board for vector network analyzer (VNA) RF measurements.

Each subdirectory is a standalone KiCad project with its schematics and PCB layout, and a production folder with the manufacturing files (gerbers, BOM, pick-and-place positions) of the released revisions.

The projects use the symbol, footprint and 3D model libraries from Hardware-Resources.

🔌 Integrated Debugger firmware

No firmware is distributed in this repository. The Integrated Debugger runs the upstream Black Magic Debug firmware (GPLv3), which can be installed and updated with bmputil.

The hardware designs in this repository are original work, released under the MIT Licence (see LICENSE). They are compatible with Black Magic Debug firmware but are not derived from it.

📄 Licence

The hardware designs in this repository are released under the MIT Licence, see LICENSE.

Parts

7
QtyValueFootprintReferences
5Coaxial TestpointPicoballoon Mechanical & Misc:MM8030-2610RK0TP1, TP2, TP3, TP4, TP5
2100ΩPicoballoon Passives:Resistor 0603R1, R2

More from PicoballoonLabs/Debug-Boards

3
  • 6 layers36.8 × 16.4 mmIntegrated Debugger, the printed circuit board in 3D

    Integrated Debugger

    PicoballoonLabs/Debug-Boards

    Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator

    72 parts1MIT
  • 2 layers20 × 38.1 mmDebug Adapter, the printed circuit board in 3D

    Debug Adapter

    PicoballoonLabs/Debug-Boards

    Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator

    34 parts1MIT
  • 2 layers100 × 5.5 mmFlex debug cable, the printed circuit board in 3D

    Flex debug cable

    PicoballoonLabs/Debug-Boards

    Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator

    3 parts1MIT

Similar boards

  • 2 layers50.8 × 22.9 mmJunebug, the printed circuit board in 3D

    Junebug

    CMUAbstract/junebug

    Chipsat development board for low-power, embedded computing in space

    33 partsApache-2.0
  • 4 layers25.4 × 25.6 mmBotox Mote, the printed circuit board in 3D

    Botox Mote

    TUDSSL/Botoks

    Batteryless timekeeping software and hardware

    109 parts11
  • 4 layers70 × 50 mmMotor power poc, the printed circuit board in 3D

    Motor power poc

    Galacs/motor-power-poc

    A POC PCB to test circuit electrical protections and motor control schemes

    165 parts
  • 4 layers128.1 × 87.6 mmThesis, the printed circuit board in 3D

    Thesis

    MZMurad/X-band_Transmitter_Thesis_Files

    This is a repo for all the files used and mentioned in my thesis

    103 parts
  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0

Questions

How big is the RF CAL PCB?

It measures 17 × 10 mm and has 2 copper layers, 1.09 mm thick.

What parts does the RF CAL use?

7 parts, built around the MM8030-2610RK0 and RT0603FRD07100RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RF CAL KiCad files?

From the PicoballoonLabs/Debug-Boards repository on GitHub, at the commit this page was made from: the board is RF VNA calibrator/RF_CAL.kicad_pcb and its schematic Debug Adapter/Debug Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RF CAL design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).