Skip to the content
2 layers34 × 29 mmOp amp version, the printed circuit board in 3D

A place to hold all projects I have made while reading the book Learning The Art of Electronics

Size
34 × 29 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
10
Pads
32
Tracks, vias
28, 2
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
18 Dec 2024
Updated
14 Mar 2025

Overview

Op amp version is an open-source printed circuit board by PhysicsUofRAUI, from the PhysicsUofRAUI/laoe_projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 34 × 29 mm with 13 parts on 10 nets, routed with 28 tracks and 2 vias.

It is built around the TLC372CP. Its parts include 5 resistors, 4 connectors, 1 capacitor, 1 IC and 1 diode. It belongs with the audio and music boards of this library.

Main components

1

README

power_supply_project/readme.md

Intro

This project is part of my learning for the learning the Art of Electronics. It is a simple power supply that I made based on what I've learned.

Regulator calculations

Output Voltage

Vref = 1.25V

R2 = 2k

R4 = 2.2k

R5 = 0 - 10k

Next part is going to ignore the Iref error term that comes out of the reference terminal for simplicity.

Vout ~ Vref[1 + (R4+R5)/R2]

The minimum Vout would then be: Vout = 1.25V + 1.25V(2.2k/2k) = 2.6V

The maximum Vout would then be: Vout = 1.25V + 1.25V(12.2k/2k) = 8.9V

Parts

13
QtyValueFootprintReferences
4Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J2, J3, J4
2330kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R4
10.01uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
133kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
1680Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5
1Battery_CellConnector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mmBT1
1LEDLED_THT:LED_D5.0mmD1
1R_PhotoResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1TLC372CPPackage_DIP:DIP-8_W7.62mmU2

More from PhysicsUofRAUI/laoe_projects

4
  • 2 layers80 × 47 mmDusk to dawn, the printed circuit board in 3D

    Dusk to dawn

    PhysicsUofRAUI/laoe_projects

    A place to hold all projects I have made while reading the book Learning The Art of Electronics

    26 partsMIT
  • 2 layers127.5 × 45 mmPower supply, the printed circuit board in 3D

    Power supply

    PhysicsUofRAUI/laoe_projects

    A place to hold all projects I have made while reading the book Learning The Art of Electronics

    20 partsMIT
  • 2 layers109.2 × 57.1 mmSRAM Programming, the printed circuit board in 3D

    SRAM Programming

    PhysicsUofRAUI/laoe_projects

    A place to hold all projects I have made while reading the book Learning The Art of Electronics

    20 partsMIT
  • 2 layers42 × 29 mmSurface mount op amp version, the printed circuit board in 3D

    Surface mount op amp version

    PhysicsUofRAUI/laoe_projects

    A place to hold all projects I have made while reading the book Learning The Art of Electronics

    13 partsMIT

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Op amp version PCB?

It measures 34 × 29 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Op amp version use?

13 parts, built around the TLC372CP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Op amp version KiCad files?

From the PhysicsUofRAUI/laoe_projects repository on GitHub, at the commit this page was made from: the board is dusk_to_dawn/op_amp_version/op_amp_version.kicad_pcb and its schematic SRAM_Programming/SRAM_Programming.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Op amp version design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).