2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers48.3 × 53.3 mm
PlantpotBoard
Phylex/Jungle-Management-SystemAutomated plant watering system
- Size
- 48.3 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 46
- Pads
- 120
- Tracks, vias
- 59, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 May 2021
- Updated
- 30 Aug 2021
Overview
PlantpotBoard is an open-source printed circuit board by Phylex, from the Phylex/Jungle-Management-System repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 48.3 × 53.3 mm with 10 parts on 46 nets, routed with 59 tracks and 0 vias.
It is built around the BD135-16. Its parts include 3 resistors, 3 connectors, 1 IC, 1 diode and 1 transistor. It belongs with the RP2040 boards of this library.
Main components
1README
README.md560nm
Automated plant watering system
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1N5817 | Diode_THT:D_A-405_P10.16mm_Horizontal | D1 |
| 1 | 50k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 510 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 5k-200k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
| 1 | BD135-16 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | Bus Connector | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | Moisture Sensor | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | Solenoid | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the PlantpotBoard PCB?
It measures 48.3 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PlantpotBoard use?
10 parts, built around the BD135-16. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PlantpotBoard KiCad files?
From the Phylex/Jungle-Management-System repository on GitHub, at the commit this page was made from: the board is plantpot_hardware/PlantpotBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PlantpotBoard design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).