2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers57.4 × 19 mm
ESP-12E Breakout
phybros/esp12-breakout2An open source hardware design for a breakout board for the ESP-12E/F
- Size
- 57.4 × 19 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 22
- Pads
- 44
- Tracks, vias
- 93, 14
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Oct 2022
- Updated
- 19 Oct 2022
Overview
ESP-12E Breakout is an open-source printed circuit board by phybros, from the phybros/esp12-breakout repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 57.4 × 19 mm with 3 parts on 22 nets, routed with 93 tracks and 14 vias.
It is built around the ESP-12E. Its parts include 2 connectors and 1 IC. It belongs with the interfaces and adapters and microcontroller boards boards and the ESP8266 boards of this library.
Main components
1README
README.mdBreakout Board for ESP-12E and ESP-12F
This repo contains all the design files to make a breakout board for the ESP-12E and the ESP-12F which will allow you to use the ESP module on a breadboard.
The project was created using KiCAD v6.
Design Goals
- Breadboard compatible (i.e. 2.54mm pitch)
- Breadboard connection doesn't cover all the breadboard holes
- Max 2-sided PCB
- As small (read: cheap to fabricate) as possible
Screenshots/Photos
License
This repo is licensed under the Attribution-ShareAlike 4.0 license (CC BY-SA 4.0)
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x11_Male | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J1, J2 |
| 1 | ESP-12E | RF_Module:ESP-12E | U1 |
Questions
How big is the ESP-12E Breakout PCB?
It measures 57.4 × 19 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP-12E Breakout use?
3 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP-12E Breakout KiCad files?
From the phybros/esp12-breakout repository on GitHub, at the commit this page was made from: the board is ESP-12E Breakout.kicad_pcb and its schematic ESP-12E Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP-12E Breakout design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers43 × 34.3 mm
- 2 layers25.6 × 23 mm
Breakout
skorokithakis/tiny-ESP8266-breakout
A very small and basic ESP8266 breakout board
12 parts115BSD-2-Clause - 2 layers104.8 × 72.1 mm
SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers30 × 65 mm
Hardpass pcb
girst/hardpass-passwordmanager-mirror-of-git.gir.st
https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.
34 parts101GPL-3.0 - 2 layers82.5 × 22.4 mm
Window Sensor
MakerMeik/Window-Sensor
Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w
19 parts67 - 2 layers49.5 × 30 mm
- 2 layers100 × 45 mm
