PhluxPaws/DevBoardATSAML10E16ADevelopment Board for AtSAML10E16A Cortex M23 Microcontroller
DevBoardATSAML10E16A is an open-source printed circuit board by PhluxPaws, from the PhluxPaws/DevBoardATSAML10E16A repository on GitHub. It is a 2-layer board of 19 × 43.4 mm with 25 parts on 39 nets, routed with 371 tracks and 45 vias.
It is built around the PA01. Its parts include 8 capacitors, 6 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the SAM D and SAM boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C7, C8, C10 |
| 3 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R4 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R6 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C9 |
| 2 | Conn_01x16_Male | kawaii_2019:Header_1x16_P2.54mm_Castellated | J2, J3 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 1 | ATSAML10E16A-AUT | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | NP | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | NPC4625HSN33 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | PA00 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | PA01 | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | POWER | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | RESET | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | SWD | kawaii_2019:FTSH-105-01-L-DV-K | J1 |
| 1 | VOUT | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
It measures 19 × 43.4 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the PA01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PhluxPaws/DevBoardATSAML10E16A repository on GitHub, at the commit this page was made from: the board is hardware.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PhluxPaws before reusing the design.
Duet3D/Duet3-ScanningZProbe
The Duet 3 Scanning Z probe is a CAN-FD connected inductive sensing board, with compatible inductive PCB coils. It allows for a point mesh of the bed to be built up quickly as no movement in Z is required to read the…
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.