2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70
2 layers68.8 × 37 mm
C9000PADummyDisplay
phl0/C9000PADummyDisplaySmall PCB to carry C9000PADummy with 7-segment LED
- Size
- 68.8 × 37 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 20
- Pads
- 79
- Tracks, vias
- 90, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Sep 2018
- Updated
- 6 Sep 2018
Overview
C9000PADummyDisplay is an open-source printed circuit board by phl0, from the phl0/C9000PADummyDisplay repository on GitHub. It is a 2-layer board of 68.8 × 37 mm with 30 parts on 20 nets, routed with 90 tracks and 13 vias.
It is built around the LTS-6960HR. Its parts include 8 resistors and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdC9000PADummyDisplay
Small PCB to carry C9000PADummy with 7-segment LED
This is a small carrier PCB to mount an Arduino Nano with a 7-segemnt LED to show the configured power level of the Ericsson C9000PADummy. For software and wiring please see: https://github.com/rwth-afu/C9000PADummy.
Revisions
Revision 0.1
Initial draft. Working fine so far.
BOM
You will need a 7-segement LED module and 8 resistors 270Ohm in 0805 size. There is a Reichelt shopping cart.
License
This project is released under the Creative Commons Attribution-NonCommercial-ShareAlike 3.0 (CC-BY-NC-SA 3.0, https://creativecommons.org/licenses/by-nc-sa/3.0/) license. You may edit and share it as you like, as long as credit is given and the license is not changed. You can build as many boards for you and your friends as you like and you can even sell it to them to cover your costs, however it is strictly forbidden to turn this into a commercial product! You are not allowed to build and sell these boards for profit!
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 270 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 1 | Arduino_Nano_Socket | arduino-kicad-library:Arduino_Nano_Socket | XA1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LTS-6960HR | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | AFF1 |
The 11 most common of 30 parts.
Similar boards
- 2 layers121.9 × 49.5 mm
Asus Qcode
Sciguy429/Qcode-Breakout-Board
This is an in-progress project that attempts to re add Qcode displays to lower end Asus motherboards. Asus has chosen to only provide this feature on its extremely high end boards, which now cost significantly more than…
22 parts21 - 2 layers320 × 220 mm
D lev AIO Rev2
lens42/D-Lev-All-in-One-PCB
This integrates the excellent D-Lev digital theremin design at D-Lev.com into a single surface mount PCB
202 parts4MIT - 2 layers90 × 120 mm
Vsdsquadron ai 1A
dhanvantibhavsar/RiscV_Edge_AI_Workshop
This is a edited version of quantized AI model to work as starting point for RiscV Edge-AI Workshop
10 parts2 - 2 layers90 × 120 mm
- 2 layers180 × 135 mm
- 2 layers78.5 × 60.8 mm
Tachometer
PotatoX/Band_Saw_Conversion
Cheap benchtop wood cutting band saw -> decent metal cutting
64 parts1 - 2 layers80 × 50 mm
Segundero 555
aalonsopuig/KiCad_Ejemplos
Ejemplos de circuitos utilizados en las clases que imparto en la universidad
24 partsGPL-3.0
Questions
How big is the C9000PADummyDisplay PCB?
It measures 68.8 × 37 mm and has 2 copper layers, 1.6 mm thick.
What parts does the C9000PADummyDisplay use?
30 parts, built around the LTS-6960HR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the C9000PADummyDisplay KiCad files?
From the phl0/C9000PADummyDisplay repository on GitHub, at the commit this page was made from: the board is C9000PADummyDisplay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the C9000PADummyDisplay design in my own project?
Its repository states no licence, so its author keeps all rights: ask phl0 before reusing the design.