

WeatherPV
Features: - POE power supply - Ethernet - Custom MQTT messages - Packed in a electrical junction box
- Size
- 69 × 42 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 32
- Pads
- 94
- Tracks, vias
- 238, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 Oct 2021
- Updated
- 27 Feb 2025
Overview
WeatherPV is an open-source printed circuit board by philipparndt, from the philipparndt/weather-station repository on GitHub. It is a 2-layer board of 69 × 42 mm with 26 parts on 32 nets, routed with 238 tracks and 22 vias.
It is built around the ESP-12F, DHT22 and DS18B20. Its parts include 7 resistors, 1 capacitor and 1 diode. It belongs with the ESP8266 boards of this library.
Main components
3ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesDHT22
插件-40℃~+80℃ 3.3V 5%RH~99%RH 500uA ±3%RH 插件 Temperature and Humidity Sensor ROHSHAIGUTemperature And Humidity SensorDS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
README
README.mdweather-station
Weather station implemented with esphome
- ESP32-POE
- Eltako-Windsensor-WS
- Temparature sensors (1-wire)
- DHT sensor (humidity / temperature)
- BH1750 Light sensor
- OLED display
Features:
- POE power supply
- Ethernet
- Custom MQTT messages
- Packed in a electrical junction box
Messages
// TBD
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_ISO14580_Pad | H5, H6, H7, H8 |
| 2 | 1Wire | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | 1W1, 1W2 |
| 2 | I2C | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | I2C1, I2C2 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | DHT22 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | DHT22 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | 1W |
| 1 | ESP-12F | RF_Module:ESP-12E | ESP12F |
| 1 | ESP12_DBG | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | DBG2 |
| 1 | ESP12_PROG | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | PROG1 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | UEXT_DBG | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | DBG1 |
| 1 | UEXT_Host | PhilippLibrary:IDC-Stecker_2x05_P2.54mm_Vertical | UEXT1 |
| 1 | Wind | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | Wind1 |
Similar boards
- 2 layers47.8 × 37.3 mm

- 2 layers162 × 60 mm

Esp shield
felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.
20 parts27 - 2 layers74.9 × 40.6 mm

Anavi thermometer
AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules
25 parts17 - 2 layers100 × 100 mm

- 2 layers126.2 × 143.6 mm

Sciencepcb
Sidbit08/ABEX_PCB_v1
A custom ESP32-S3-based PCB designed in KiCad for automated soil sample analysis, featuring drivers and interfaces for environmental sensors, peristaltic pumps, and auger drilling actuators.
100 parts1 - 2 layers81.5 × 131.5 mm

Control board
ausocean/rig
Repository for AusOcean CAD files, PCB design files, 3D models and 3D modeling scripts.
83 parts - 2 layers115 × 75 mm

- 2 layers94 × 68.5 mm

Questions
How big is the WeatherPV PCB?
It measures 69 × 42 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WeatherPV use?
26 parts, built around the ESP-12F, DHT22 and DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WeatherPV KiCad files?
From the philipparndt/weather-station repository on GitHub, at the commit this page was made from: the board is pcb/WeatherPV.kicad_pcb and its schematic pcb/WeatherPV.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WeatherPV design in my own project?
Its repository states no licence, so its author keeps all rights: ask philipparndt before reusing the design.