4 layers70 × 40.6 mm
Sopracciglio rp2040
miekush/sopracciglio-rp2040
Raspberry Pi RP2040 based Sopracciglio Board for use with 2026 Open Sauce Badge
132 parts
2 layers100.9 × 144.5 mm
Sinthinator
phenax/sinthinator1A capacitive touch slider based music instrument
- Size
- 100.9 × 144.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 69
- Pads
- 340
- Tracks, vias
- 467, 37
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 May 2026
- Updated
- 24 May 2026
Overview
Sinthinator is an open-source printed circuit board by phenax, from the phenax/sinthinator repository on GitHub. It is a 2-layer board of 100.9 × 144.5 mm with 57 parts on 69 nets, routed with 467 tracks and 37 vias.
It is built around the STM32C011F6P6, CAP1206-1-SL and PCA9544APW, with the AMS1117-3.3 among its other parts. Its parts include 18 resistors, 16 capacitors, 9 ICs, 3 connectors and 3 switches. It belongs with the STM32 boards of this library.
Main components
4
STM32C011F6P6
TSSOP-20-40℃~+85℃ 12bit 18 2V~3.6V 32 Bit 32KB 48MHz 6KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
CAP1206-1-SL
SOIC-14-40℃~+125℃ 3V~5.5V 5uA 6 750uA 8kV Capacitive Touch SOIC-14 Touch Sensors ROHSMicrochip TechnologyTouch SensorsPCA9544APW
TSSOP-202.3V~3.6V、4.5V~5.5V I2C、SMBus Interrupt generation、Power-up/reset configuration TSSOP-20 Analog Switches - Special Purpose ROHSNXP SemiconductorsInterface - Specialized
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdsinthinator [wip]
A capacitive touch slider based toy music instrument
| schematic | pcb |
|---|---|
 |  |
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 4.7k | PCM_SparkFun-Resistor:R_0603_1608Metric | R1, R2, R6, R7, R8, R9, R12, R13, R14, R18 |
| 5 | 0.1uF | PCM_SparkFun-Capacitor:C_0603_1608Metric | C1, C10, C11, C13, C16 |
| 5 | 1.0uF | PCM_SparkFun-Capacitor:C_0603_1608Metric | C6, C8, C9, C12, C14 |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | M2-1, M2-2, M2-3, M2-4 |
| 3 | 10uF | PCM_SparkFun-Capacitor:C_0603_1608Metric | C2, C5, C7 |
| 3 | 1k | PCM_SparkFun-Resistor:R_0603_1608Metric | R3, R4, R5 |
| 3 | 2.2k | PCM_SparkFun-Resistor:R_0603_1608Metric | R15, R16, R17 |
| 3 | CAP1206 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U4, U5 |
| 3 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1, SW2, SW3 |
| 3 | ~ | Slider:TouchSlider-6_100x15mm | UTouch1, UTouch2, UTouch3 |
| 2 | 10uF | PCM_SparkFun-Capacitor:C_0603_1608Metric_Polar | C3, C4 |
| 2 | 5.1k | PCM_SparkFun-Resistor:R_0603_1608Metric | R10, R11 |
| 1 | 1uF | PCM_SparkFun-Capacitor:C_0603_1608Metric | C15 |
| 1 | 3.5mm TRRS | PCM_SparkFun-Connector:Audio_Jack_3.5mm_TRRS_SMD_RA | J1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | Audio Out | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J3 |
| 1 | MCP4725 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | PAM8302A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | PCA9544APW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | R_Potentiometer | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | STM32C011F6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U9 |
| 1 | USB-C | PCM_SparkFun-Connector:USB-C_16 | J2 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | U6 |
Questions
How big is the Sinthinator PCB?
It measures 100.9 × 144.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sinthinator use?
57 parts, built around the STM32C011F6P6, CAP1206-1-SL, PCA9544APW and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sinthinator KiCad files?
From the phenax/sinthinator repository on GitHub, at the commit this page was made from: the board is hardware/sinthinator.kicad_pcb and its schematic hardware/sinthinator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sinthinator design in my own project?
Its repository states no licence, so its author keeps all rights: ask phenax before reusing the design.
Similar boards
- 4 layers97 × 80.9 mm
Module17-HMI
M17-Project/Module_17
M17 modem board for 9600-baud capable radios
59 parts129CERN-OHL-W-2.0 - 2 layers
Lmwb RGB Ball
LMWB/Pasta-alla-Norma
Circular shaped RGB-LED PCB with integrated Microcontroller and EEPROM
41 partsMIT - 4 layers239.4 × 165.7 mm
- 6 layers55 × 120 mm
BitForge Nano
WantClueTechnologies/BitForge-Nano
This project presents a fully open-source Bitcoin mining hardware platform, designed for transparency, modularity, and extensibility.
220 parts15CERN-OHL-S-2.0 - 2 layers191.5 × 100 mm
HyperNet-2-MainBoard
TheStaticTurtle/HyperNet
HyperNet is an 8-in, 8-out open-source audio stagebox based on Ultranet
232 parts6MIT - 6 layers145 × 355 mm
Backplane
stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research
529 parts2 - 2 layers40.3 × 100 mm
Dodecamodulator
adeboni/eurorack
This repository stores various eurorack module designs I've made
109 parts1GPL-3.0