
Pi shield
petrvlasak/jopenscan-pcb
Alternative PCBs for the OpenScan DIY 3D Scanner with few improvements for JOpenScan

Alternative PCBs for the OpenScan DIY 3D Scanner with few improvements for JOpenScan
Ringlight is an open-source printed circuit board by petrvlasak, from the petrvlasak/jopenscan-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 59.3 × 59.3 mm with 13 parts on 10 nets, routed with 39 tracks and 0 vias.
Its parts include 8 diodes and 1 connector.
These PCBs are compatible with the original OpenScan DIY 3D Scanner firmware. They contain some improvements:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED_Pad | LED_SMD:LED_1W_3W_R8 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | 12V | Connector_Wire:SolderWire-0.5sqmm_1x03_P4.8mm_D0.9mm_OD2.3mm | J1 |
The 9 most common of 13 parts.

petrvlasak/jopenscan-pcb
Alternative PCBs for the OpenScan DIY 3D Scanner with few improvements for JOpenScan



samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments


willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 59.3 × 59.3 mm and has 2 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the petrvlasak/jopenscan-pcb repository on GitHub, at the commit this page was made from: the board is ringlight/ringlight.kicad_pcb and its schematic pi-shield/pi-shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).