
Pcb v1
petrikevich2005/wifi-dmx-controller
этот репозиторий предназначен для хранения прошивки микроконтроллера этого проекта: https://docs.google.com/document/d/1X2l9bCAOKjv8QiKN7pxREiMzuwiFvaY4nnqX09m9t8/edit?usp=sharing

этот репозиторий предназначен для хранения прошивки микроконтроллера этого проекта: https://docs.google.com/document/d/1X2l9bCAOKjv8QiKN7pxREiMzuwiFvaY4nnqX09m9t8/edit?usp=sharing
Pcb v1 is an open-source printed circuit board by petrikevich2005, from the petrikevich2005/wifi-dmx-controller repository on GitHub. It is a 2-layer board of 118 × 58 mm with 34 parts on 45 nets, routed with 51 tracks and 4 vias.
It is built around the ESP32-WROOM-32U, SP3485EN-Y and AMS1117-3.3. Its parts include 11 resistors, 8 capacitors, 3 ICs and 3 diodes. It belongs with the ESP32 boards of this library.
этот репозиторий предназначен для хранения прошивки микроконтроллера этого проекта: https://docs.google.com/document/d/1X2l_9bCAOKjv8QiKN7pxREiMzuwiFvaY4nnqX09m9t8/edit?usp=sharing
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3, R5, R6, R8, R11 |
| 4 | SW_Push | User_Library:2pin_2-1-2.54mm | FIRMWARE1, MODE1, RESET1, RESTART1 |
| 3 | 0.1u | Capacitor_SMD:C_1206_3216Metric | C4, C6, C8 |
| 3 | 150 | Resistor_SMD:R_1206_3216Metric | R1, R7, R9 |
| 3 | LED | LED_THT:LED_D5.0mm_Clear | D1, D2, D3 |
| 2 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3, C7 |
| 2 | 120 | Resistor_SMD:R_1206_3216Metric | R4, R10 |
| 2 | SP3485EN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 2 | XLR3 | User_Library:3pin_3-1.5mm | DMX1, DMX2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 22u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 470u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5 |
| 1 | 5V | User_Library:2pin_2-1mm | POWER1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | ESP32-WROOM-32U | RF_Module:ESP32-WROOM-32U | ESP1 |
| 1 | ~ | User_Library:tx_rx_gnd | PINS1 |

petrikevich2005/wifi-dmx-controller
этот репозиторий предназначен для хранения прошивки микроконтроллера этого проекта: https://docs.google.com/document/d/1X2l9bCAOKjv8QiKN7pxREiMzuwiFvaY4nnqX09m9t8/edit?usp=sharing

ReflexCreations/io-board
This repository contains source documents and manufacturing files for the RE:Flex Dance Pad's I/O Board. It was created using KiCAD 5.1.4.

HecVelaz/Proyecto-Mburica-
Repositorio central del Proyecto Mburicao: Sistema IoT de monitoreo de nivel de cauces, modelos de predicción con IA y documentación científica


aayu0-0/RS485-to-WiFi-Gateway
An STM32-based RS485 to Wi-Fi gateway supporting Modbus communication for industrial IoT applications.

bookofthefuture/hydroponics-pcb
KiCad PCB designs for the two-tier IKEA hydroponics monitoring/control system



It measures 118 × 58 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the ESP32-WROOM-32U, SP3485EN-Y and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the petrikevich2005/wifi-dmx-controller repository on GitHub, at the commit this page was made from: the board is wifi_dmx_controller_v2_0/pcb_v1/pcb_v1.kicad_pcb and its schematic wifi_dmx_controller_v1_0/pcb_v1/pcb_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask petrikevich2005 before reusing the design.