

Touchdro board
ToucDRO DIY ESP32 Board
- Size
- 60 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 45
- Pads
- 134
- Tracks, vias
- 283, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Feb 2024
- Updated
- 4 Mar 2025
Overview
Touchdro board is an open-source printed circuit board by petmakris, from the petmakris/touchdro repository on GitHub. It is a 2-layer board of 60 × 100 mm with 38 parts on 45 nets, routed with 283 tracks and 4 vias.
It is built around the 74HC14. Its parts include 14 resistors, 10 capacitors, 8 connectors and 2 ICs. It belongs with the ESP32 boards of this library.
Main components
1README
Readme.mdParts
-
ESP32 DEVKIT V1
-
Micro USB Connector Breakout
-
±5% 100V 100nF -40℃~+110℃ Metallized Polyester Plugin,P=5mm
-
47uF 50V ±20% 180mA@100kHz Plugin,D6.3xL12mm
-
Metal Film Resistors 4.7kΩ 250mW ±100ppm/℃ ±1%
-
Metal Film Resistors 47kΩ 250mW ±50ppm/℃ ±1%
-
SN74HC14N Schmitt Trigger 6 21ns@6V,50pF 2uA 2V~6V DIP-14 Inverters ROHS
Micro USB Breakout

ESP32 DevKit V1

Firmware
esptool.py --chip esp32 --port COM5 --baud 460800 --before default_reset --after hard_reset write_flash --flash_mode dio --flash_size detect --flash_freq 40m 0x1000 bootloader.bin 0x8000 partition-table.bin 0x10000 touchdro-diy-universal-1.6.binIt seems that for the esp32 to broadcast you need to keep the boot button pressed
References
- https://www.touchdro.com/resources/adapters/diy/esp32-diy-dro.html
- https://gitlab.com/VictorLamoine/kicad
https://www.touchdro.com/resources/adapters/diy/esp32-diy-dro.html
Ordering from JLCPCB
Step 1
from within PCB:
-
Export Gerber files
-
Export Drill Files
-
Export Placement file
- Separate files for front/back
- Keep only top file
- Remove components not to be mounted
Step 2
from within Schematic:
Create BOM compatible with JLCPCB the custom plugin from within our kicad-libs projecs:

This plugin will include only the components with a JLCPCB attributes
Production files
kicad_pos_to_cpl.py POSITION.POSITION-JLCPCB.csv overrides.json [overrides.json]
Tune placement file
Example overrides.json:
{
"D3": 180,
"Q1": 180,
"U6": -90,
"U8": -90
}Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_THT:C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1, C2, C4, C5, C7, C8, C9, C10 |
| 8 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R15, R16, R19, R20 |
| 6 | 47K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R12, R13, R14, R17, R18 |
| 4 | MountingHole | MountingHole:MountingHole_3.5mm | J5, J6, J7, J8 |
| 3 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3 |
| 3 | USB_B_Micro | MicroUSB-Breakout:MicroUSB | J1, J2, J3 |
| 2 | 47u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C6, C11 |
| 1 | 2EDGR-2P | 2EDGK:2EDGR-2P | TB1 |
| 1 | 74HC14 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J20 |
| 1 | ESP32_DevKit_V1_DOIT | ESP32-Devkit-V1:esp32_devkit_v1_doit | U3 |
More from petmakris/touchdro
1- 4 layers

Similar boards
- 2 layers89.2 × 82.6 mm

Desktop 50 Pin TopConn
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
108 parts459GPL-3.0 - 2 layers88.9 × 98.4 mm

Kickstart switcher-12up
keirf/pcb-projects
The old Kickstart switcher documentation is here.
197 parts108CC0-1.0 - 2 layers100 × 100 mm

Explorer
anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.
266 parts100 - 2 layers160.1 × 101 mm

PLC-14500
nicolacimmino/PLC-14500
Retro trainer board based on the MC14500 1-bit ICU. The project is OSHW certified and a ready to assemble kit is available on Tindie.
173 parts70GPL-3.0 - 4 layers69 × 74 mm

- 2 layers154.9 × 139.7 mm

68kBoard
transistorfet/computie
A collection of 68k computer projects, including a unix-like operating system written in C that runs on them
78 parts69GPL-3.0 - 2 layers139 × 190 mm

Programmable precision resistor
sbstnh/programmable_precision_resistor
A SCPI programmable precision resistor
253 parts65BSD-3-Clause - 2 layers100 × 100 mm

Questions
How big is the Touchdro board PCB?
It measures 60 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Touchdro board use?
38 parts, built around the 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Touchdro board KiCad files?
From the petmakris/touchdro repository on GitHub, at the commit this page was made from: the board is esp32/touchdro-board/touchdro-board.kicad_pcb and its schematic esp32/touchdro-board/touchdro-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Touchdro board design in my own project?
Its repository states no licence, so its author keeps all rights: ask petmakris before reusing the design.