Skip to the content
2 layers48.9 × 67.3 mmPossu2, the printed circuit board in 3D

Sikin led salamaan ja Otit led merkkiin koodi, piirilevy ja ohjeet

Size
48.9 × 67.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
23
Pads
117
Tracks, vias
463, 26
Routed
Yes
KiCad
KiCad 4
Created
2 Sep 2017
Updated
5 Sep 2017

Overview

Possu2 is an open-source printed circuit board by petelukk, from the petelukk/Salama repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 48.9 × 67.3 mm with 45 parts on 23 nets, routed with 463 tracks and 26 vias.

It is built around the LP2981AIM5-5.0. Its parts include 32 diodes, 4 capacitors, 4 resistors, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Salama

Sikin led salamaan ja Otit led merkkiin koodi, piirilevy ja ohjeet

Piirilevyt

Piirretty Kicadilla. Todo: Syövytystä varten maskit. Sik maski saattaa löytyä vielä jostain. Otitille ei ole tehty vaan levyt jyrsittiin.

Piirilevyn kasausohje

TODO Pittää ettiä jostain...

Ohjelma

Ohjelma siirtyy levylle kätevästi käyttäen arduinoa ohjelmointilaitteena.

text
Salaman ohjelmointiliittimen pinnit keskeltä reunalle:

Nro:  Nimi:   Arduinon pinni (nano):

6:    Reset   10
5:    GND     GND
4:    VCC     VCC
3:    SCK     13
2:    MISO    12
1:    MOSI    11

Muista vetää arduinon Reset ylös. Ardu nollautuu kun sarjaliikenne alotetaan....

Src hakemistossa on lediportit_oikein.h ja lediportit_väärin.h tiedostot joista jompikumpi kopioidaan lediportit.h tiedoston päälle mikäli ledit on juotettu vastoin ohjetta. (TODO: nimet ovat ehkä väärin)

Koodin kääntämiseen ja ohjelman levylle siirtämiseen komennot ovat:

text
// kääntäminen
avr-gcc -mmcu=attiny861 vilkutus.c salama.c -I./ -Os -DF_CPU=8000000UL  

// Fläsäys käyttäen arduino-isp:tä
avrdude -c avrisp -p t861 -B3 -P /dev/ttyUSB0 -b 19200 -U flash:w:a.out

// Fuse asetukset käyttäen arduino-isp:tä
avrdude -c avrisp -p t861 -B3 -P /dev/ttyUSB0 -b 19200 -U lfuse:w:0xe2:m -U hfuse:w:0xdf:m

Parts

45
QtyValueFootprintReferences
32LEDSalamaLEDD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +16
4RSM1206R1, R2, R3, R4
2Cc_1812C3, C4
2CP1c_tant_CC1, C2
1ATTINY861-SSO20LIC1
1CONN_2Salama_virtaP2
1CONN_6OhjelmointiliitinP1
1LP2981AIMLM2981AIMREGU1
1SW_PUSHSalamaNAppiSW1

Similar boards

  • 2 layers30 × 61.3 mmModuleV440, the printed circuit board in 3D

    ModuleV440

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    45 parts1.1k
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    45 parts517GPL-2.0
  • 2 layers49.8 × 88.9 mmLDG WING FOLD PLACARD, the printed circuit board in 3D

    LDG WING FOLD PLACARD

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    45 parts431
  • 2 layers26.5 × 34.4 mmPicoLoaderNSB, the printed circuit board in 3D

    PicoLoaderNSB

    makeo/PicoLoader

    A cheap and easy to install modchip for the Nintendo GameCube!

    45 parts320GPL-2.0
  • 2 layers40.2 × 19 mmOMGS3 Carrier R1, the printed circuit board in 3D

    OMGS3 Carrier R1

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    45 parts296
  • 2 layers63.5 × 63.5 mmMain pcb, the printed circuit board in 3D

    Main pcb

    peterkrull/quad

    Firmware, hardware and documentation for my autonomous quad copter project

    45 parts210GPL-3.0
  • 2 layers99.1 × 81.9 mmRC6502 Terminal, the printed circuit board in 3D

    RC6502 Terminal

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    45 parts193GPL-3.0
  • 2 layers116.1 × 94.7 mmMiniDox, the printed circuit board in 3D

    MiniDox

    That-Canadian/MiniDox_PCB

    MiniDox Keyboard, PCB files

    45 parts169WTFPL

Questions

How big is the Possu2 PCB?

It measures 48.9 × 67.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Possu2 use?

45 parts, built around the LP2981AIM5-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Possu2 KiCad files?

From the petelukk/Salama repository on GitHub, at the commit this page was made from: the board is kicad/possu2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Possu2 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).