Skip to the content
2 layers50 × 45 mmMP28167 - Breakout, the printed circuit board in 3D

MP28167 - Breakout

peteEH/buck-boost-01

buck boost programmable regulator - breakout board

Size
50 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
17
Pads
110
Tracks, vias
112, 129
Pours
9
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
15 Apr 2022
Updated
16 Apr 2022

Overview

MP28167 - Breakout is an open-source printed circuit board by peteEH, from the peteEH/buck-boost-01 repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 45 mm with 40 parts on 17 nets, routed with 112 tracks and 129 vias.

Its parts include 23 capacitors, 4 resistors, 3 connectors, 1 IC and 1 inductor. It belongs with the interfaces and adapters and power boards of this library.

README

README.md

buck-boost-01

buck boost programmable regulator - breakout board

  • programmable (i2c) buck-boost converter
  • 22V in MAX / 20V out MAX - up to 3A out / 4A in
  • intention to use as a serially controlled battery charger
  • breakout board for the mp28167

Parts

40
QtyValueFootprintReferences
161uF|0805Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2, C4, C7, C8, C9, C12, C13, C14, C15, C16, C18, C20, C21, C22, C23
4M3 HoleMountingHole:MountingHole_3.2mm_M3_ISO14580_PadH1, H2, H3, H4
333uF|35V|6.3DCapacitor_SMD:CP_Elec_6.3x5.4C5, C17, C19
2100nF|0603Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC10, C11
2402K|0603Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR2, R4
24A|1206Inductor_SMD:L_1206_3216Metric_Pad1.42x1.75mm_HandSolderFB1, FB2
2Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1, J2
2Logo_Open_Hardware_LargeSymbol:OSHW-Symbol_6.7x6mm_SilkScreenLOGO1, LOGO1
11uF|0603Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC6
12.54mm IDC HeaderConnector_IDC:IDC-Header_2x07_P2.54mm_VerticalJ4
121.5K|0603Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1
122nF|0603Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC3
135.7K|0603Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR3
14.7uF|IHLP2525Inductor_SMD:L_Vishay_IHLP-2525L1
1MP28167GQ-A_PHmps_buck_boost:MP28167GQ-AU1

Similar boards

  • 2 layers139.7 × 73.7 mm134pin 7-967288-1, the printed circuit board in 3D

    134pin 7-967288-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    40 parts1.2k
  • 2 layers149.4 × 177.4 mmLightsculpture, the printed circuit board in 3D

    Lightsculpture

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    40 parts915
  • 2 layers150 × 50 mmEleLab v2 Bus150, the printed circuit board in 3D

    EleLab v2 Bus150

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    40 parts531GPL-3.0
  • 2 layers66.4 × 48.1 mmRaspberry, the printed circuit board in 3D

    Raspberry

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    40 parts456
  • 2 layers44 × 44 mmTrackball, the printed circuit board in 3D

    Trackball

    jfedor2/rp2040-pmw3360

    RP2040+PMW3360 PCB and code

    40 parts432
  • 2 layers90.8 × 53.3 mmABSIS Bus Master, the printed circuit board in 3D

    ABSIS Bus Master

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    40 parts431
  • 2 layers59.6 × 109.5 mmDrop, the printed circuit board in 3D

    Drop

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    40 parts410
  • 2 layers123.8 × 73.5 mmAttic, the printed circuit board in 3D

    Attic

    simondlevy/Hackflight

    Minimalist flight-control toolkit for makers

    40 parts334GPL-3.0

Questions

How big is the MP28167 - Breakout PCB?

It measures 50 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MP28167 - Breakout use?

40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MP28167 - Breakout KiCad files?

From the peteEH/buck-boost-01 repository on GitHub, at the commit this page was made from: the board is MP28167 - Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the MP28167 - Breakout design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).