NRF52840-QIAA multiconf
Prototyping PCB for nRF52840_QIAA
- Size
- 63 × 54.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 102
- Pads
- 408
- Tracks, vias
- 1,391, 319
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Apr 2025
- Updated
- 25 Apr 2025
Overview
NRF52840-QIAA multiconf is an open-source printed circuit board by petaflot, from the petaflot/nRF252840_multiconf repository on GitHub. It is a 4-layer board of 63 × 54.6 mm with 72 parts on 102 nets, routed with 1,391 tracks and 319 vias.
It is built around the NRF52840-QIAA-R and AMS1117-3.3. Its parts include 33 capacitors, 10 connectors, 9 resistors, 4 inductors and 2 ICs. It belongs with the nRF52 and nRF5x boards of this library.
Main components
2NRF52840-QIAA-R
AQFN-73-EP(7x7)-95dBm 1.7V~5.5V 2.4GHz 2.4GHz~2.4835GHz 2Mbps 4.82mA 6.26mA 8dBm SPI、USB、UART、ADC、I2S、PWM ZigBee、Bluetooth、LoRa、ISM transceiver AQFN-73-EP(7x7) RF Transceiver ICs ROHSNORDICRF Transceiver ICsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5, R6 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C11, C13, C14 |
| 4 | 12pF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C15, C16 |
| 4 | 4.7µF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C6, C8 |
| 4 | Antenna dependent | Capacitor_SMD:C_0603_1608Metric | CT1, CT2, CT3, CT4 |
| 4 | N.C. | Capacitor_SMD:C_0201_0603Metric | C30, C31, C32, C33 |
| 3 | Conn_01x26 | Connector_FFC-FPC:TE_2-1734839-6_1x26-1MP_P0.5mm_Horizontal | J1, J2, J3 |
| 3 | Conn_01x26 | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J11, J12, J13 |
| 3 | N.C. | Capacitor_SMD:C_0603_1608Metric | C12, C19, C22 |
| 3 | R | Resistor_SMD:R_0603_1608Metric | R7, R8, R9 |
| 2 | 1.0µF | Capacitor_SMD:C_0603_1608Metric | C7, C9 |
| 2 | 10µH | Inductor_SMD:L_0603_1608Metric | L1, L3 |
| 2 | 470n | Capacitor_SMD:C_0603_1608Metric | C24, C25 |
| 2 | 470p | Capacitor_SMD:C_0603_1608Metric | C23, C26 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | LED | compuchair:Everlight Elec 24-21 | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP2, JP3 |
| 1 | 0.5pF | Capacitor_SMD:C_0603_1608Metric | C21 |
| 1 | 0.8pF | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 15nH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 270n | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 27p | Capacitor_SMD:C_0603_1608Metric | C29 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X1 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X2 |
| 1 | 330p | Capacitor_SMD:C_0603_1608Metric | C28 |
| 1 | 4.7nH | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 820pF | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | Antenna | compuchair:ANT8010LL04R2400A | A2 |
| 1 | Conn_01x01_Shielded | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J21 |
| 1 | Conn_01x02 | compuchair:AANI-CH-0029 | A1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J14 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J22 |
| 1 | nRF52840-QIAA | compuchair:AQFN50P700X700X85_HS-74N | U1 |
More from petaflot/nRF252840_multiconf
1- 4 layers37 × 37 mm

Similar boards
- 4 layers80.1 × 22.2 mm

M2-smart iot module
antmicro/m2-smart-iot-module
https://antmicro.com/blog/2021/08/open-hardware-smart-m2-radio-module-for-iot/
212 parts30Apache-2.0 - 2 layers65 × 54 mm

Coffeecaller
tiacsys/ecad-coffeecaller
CoffeeCaller. Once a nice office gadget it now evolved to a small development board for the Nordic nRF52840.
85 parts14CERN-OHL-S-2.0 - 4 layers85 × 55 mm

Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
29 parts2 - 2 layers38 × 38 mm

- 4 layers64.2 × 90.9 mm

- 2 layers40 × 70 mm

- 8 layers89.9 × 92 mm

- 4 layers22.5 × 19.5 mm

Nrf52840 qiaa config1
anivelle/drone-controller
My attempt at making a drone flight controller. (On hold until I can debug my DShot with an oscilloscope)
26 parts
Questions
How big is the NRF52840-QIAA multiconf PCB?
It measures 63 × 54.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the NRF52840-QIAA multiconf use?
72 parts, built around the NRF52840-QIAA-R and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NRF52840-QIAA multiconf KiCad files?
From the petaflot/nRF252840_multiconf repository on GitHub, at the commit this page was made from: the board is nRF52840-QIAA_multiconf/nRF52840-QIAA_multiconf.kicad_pcb and its schematic nRF52840-QIAA_multiconf/conn_esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NRF52840-QIAA multiconf design in my own project?
Its repository states no licence, so its author keeps all rights: ask petaflot before reusing the design.