
24g2usb rp2350zero
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.

Adapter circuit for these 5 pin light barriers. To make the interface to the light barrier easier and to avoid having 5 cables going to the controller board I use this simple adapter.
Light barrier adapter is an open-source printed circuit board by petaben, from the petaben/light-barrier-adapter repository on GitHub. It is a 2-layer board of 32.5 × 13.8 mm with 4 parts on 4 nets, routed with 20 tracks and 0 vias.
Its parts include 2 resistors and 2 connectors. It belongs with the interfaces and adapters boards of this library.
Adapter circuit for these 5 pin light barriers. To make the interface to the light barrier easier and to avoid having 5 cables going to the controller board I use this simple adapter.

This repository contains the PCB design but it's as well easy to make the adapter on a stripboard.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 20K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Conn_PinHeader_1x03_P2.54mm_Vertical_THT_D1mm | fab:PinHeader_1x03_P2.54mm_Vertical_THT_D1mm | J2 |
| 1 | Conn_PinHeader_1x05_P2.54mm_Vertical_THT_D1mm | fab:PinHeader_1x05_P2.54mm_Vertical_THT_D1mm | J1 |

joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
It measures 32.5 × 13.8 mm and has 2 copper layers, 1.6 mm thick.
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the petaben/light-barrier-adapter repository on GitHub, at the commit this page was made from: the board is light-barrier-adapter.kicad_pcb and its schematic light-barrier-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask petaben before reusing the design.