

FishTank2
PCBs and models for my reef-pi controller
- Size
- 154.9 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 60
- Pads
- 162
- Tracks, vias
- 382, 16
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Jul 2023
- Updated
- 3 Jul 2023
Overview
FishTank2 is an open-source printed circuit board by PerilousApricot, from the PerilousApricot/FishTank2 repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 154.9 × 76.2 mm with 44 parts on 60 nets, routed with 382 tracks and 16 vias.
It is built around the R40-11D2-5/6. Its parts include 9 resistors, 5 diodes, 5 connectors and 2 transistors.
Main components
1README
README.mdFishController
PCBs and models for my reef-pi controller
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | 12v_In1, GPIO22, GPIO23, GPIO24, GPIO25, Pump1, Pump2, Shutoff1 |
| 5 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3v3_1, J3v3_2, J5v1, J12V_Always1, J12V1 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R4, R6 |
| 3 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5, R7, R8 |
| 3 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I2C_1, I2C_2, I2C_Ph1 |
| 3 | LED | LED_THT:LED_D1.8mm_W3.3mm_H2.4mm | D3, D4, D5 |
| 3 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | Temp_1, Temp_2, Temp_3 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3 |
| 2 | Q_NPN_BCE | Package_TO_SOT_THT:TO-92 | Q1, Q2 |
| 2 | R40-11D2-5/6 | Library:Relay_DPDT_NTE_NRP04 | RL1, RL2 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | SPI1 |
| 1 | Conn_02x12_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x07_P2.54mm_Vertical | GPIO_Out1 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | PiGPIO1 |
The 40 most common of 44 parts.
Similar boards
- 2 layers78 × 60 mm

- 2 layers115 × 14.5 mm

- 2 layers37.7 × 20 mm

- 2 layers88.9 × 88.4 mm

- 2 layers125 × 98 mm

3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers65 × 56.5 mm

RPiG3iMac
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
44 parts240LGPL-3.0 - 2 layers54.4 × 49.3 mm

Fx3 tn20k adapter
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
44 parts236CC-BY-4.0 - 2 layers250 × 32 mm

Questions
How big is the FishTank2 PCB?
It measures 154.9 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FishTank2 use?
44 parts, built around the R40-11D2-5/6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FishTank2 KiCad files?
From the PerilousApricot/FishTank2 repository on GitHub, at the commit this page was made from: the board is FishTank2.kicad_pcb and its schematic FishTank2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FishTank2 design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).