

HackPad Orgins
A customized XIAO RP2040-powered macropad with an OLED display and I2C soil sensor for smart garden monitoring.
- Size
- 62.5 × 62.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 14
- Pads
- 42
- Tracks, vias
- 50, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 17 Jun 2026
- Updated
- 26 Jun 2026
Overview
HackPad Orgins is an open-source printed circuit board by percentchunk, from the percentchunk/Smart-Garden-Probe repository on GitHub. It is a 2-layer board of 62.5 × 62.5 mm with 9 parts on 14 nets, routed with 50 tracks and 0 vias.
Its parts include 3 switches and 1 IC. It belongs with the lEDs and displays and keyboards and input boards of this library.
README
README.mdSmart Garden Probe
The Smart Garden Probe is a small plant-monitoring device built around the Seeed Studio XIAO RP2040. It uses a soil sensor and OLED display to show soil moisture, temperature, and whether the plant is in a good range.
Overview
This project started as a three-key Hackpad, but I wanted it to do something more useful than keyboard shortcuts, and complex enough that it stands on its own.
The device has three buttons, an OLED display, and an I2C soil sensor. The sensor reads soil moisture and temperature, and the screen shows the readings along with a simple status such as Too Dry, Good, or Too Wet.
The firmware also uses plant profiles. Each profile stores the moisture and temperature ranges for a specific plant, you can edit this with the database in the github.
Features
- Seeed Studio XIAO RP2040
- Three MX-style switches
- SSD1306 I2C OLED
- I2C capacitive soil sensor
- Custom two-layer PCB
- Custom 3D-printed enclosure
- USB-C power
- Plant profile system
- Moisture and temperature shown together
- Gerber, drill, and STEP files included
Project Views
| Top View | Front View | PCB View |
|---|---|---|
How It Works
The soil sensor sends moisture and temperature readings to the XIAO RP2040 over I2C.
The firmware compares the readings with the selected plant profile. The OLED then shows the plant name, moisture, temperature, and status.
The three buttons are used to refresh the readings, change the plant profile, and control the display.
Button Functions
| Button | Function |
|---|---|
| SW1 | Refresh the sensor readings |
| SW2 | Change the plant profile |
| SW3 | Turn the display on or off |
Hardware
| Part | Details |
|---|---|
| Microcontroller | Seeed Studio XIAO RP2040 |
| Display | 128×64 SSD1306 I2C OLED |
| Sensor | I2C soil moisture and temperature sensor |
| Inputs | Three MX-style switches |
| Power | USB-C |
| PCB | Custom two-layer KiCad PCB |
| Enclosure | 3D-printed top and bottom case |
PCB
The PCB was designed in KiCad and is about 62.5 mm by 62.5 mm.
It includes:
- The XIAO RP2040
- Three switch footprints
- OLED header
- Soil sensor header
- Four 2.5 mm mounting holes
Cad
The pad was designed in Onshape.
I added the PCB model to the CAD assembly so I could check the mounting holes, headers, USB-C port, switches, OLED, and cable opening.
The mounting holes and clearances were corrected after checking the PCB inside the case.
Firmware
The firmware is designed to:
- Read the soil sensor
- Show moisture and temperature
- Compare readings with plant profiles
- Show simple status messages
- Change profiles with SW2
- Refresh readings with SW1
- Control the display with SW3
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3 |
| 2 | Conn_01x04 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | OLED1, SoilDectector1 |
| 1 | MOUDLE-SEEEDUINO-XIAO | footprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
The 6 most common of 9 parts.
Similar boards
- 2 layers103 × 30.5 mm

- 2 layers31.8 × 47.6 mm

- 2 layers24 × 27.3 mm

Expansion Card Retrofit
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
9 parts1.1kCC-BY-4.0 - 2 layers15.6 × 17.3 mm

SKR Mini TFT Thermistor Board
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
9 parts1.1kGPL-3.0 - 2 layers39.1 × 49.5 mm

Learnoliver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
9 parts915 - 2 layers17.4 × 16.9 mm

- 2 layers9.8 × 108 mm

- 2 layers

Keyboard after
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
9 parts547GPL-3.0
Questions
How big is the HackPad Orgins PCB?
It measures 62.5 × 62.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HackPad Orgins use?
9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HackPad Orgins KiCad files?
From the percentchunk/Smart-Garden-Probe repository on GitHub, at the commit this page was made from: the board is Pcb/HackPad Orgins.kicad_pcb and its schematic Pcb/HackPad Orgins.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HackPad Orgins design in my own project?
Its repository states no licence, so its author keeps all rights: ask percentchunk before reusing the design.