Skip to the content
2 layers62.5 × 62.5 mmHackPad Orgins, the printed circuit board in 3D

A customized XIAO RP2040-powered macropad with an OLED display and I2C soil sensor for smart garden monitoring.

Size
62.5 × 62.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
14
Pads
42
Tracks, vias
50, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Jun 2026
Updated
26 Jun 2026

Overview

HackPad Orgins is an open-source printed circuit board by percentchunk, from the percentchunk/Smart-Garden-Probe repository on GitHub. It is a 2-layer board of 62.5 × 62.5 mm with 9 parts on 14 nets, routed with 50 tracks and 0 vias.

Its parts include 3 switches and 1 IC. It belongs with the lEDs and displays and keyboards and input boards of this library.

README

README.md

Smart Garden Probe

The Smart Garden Probe is a small plant-monitoring device built around the Seeed Studio XIAO RP2040. It uses a soil sensor and OLED display to show soil moisture, temperature, and whether the plant is in a good range.

Overview

This project started as a three-key Hackpad, but I wanted it to do something more useful than keyboard shortcuts, and complex enough that it stands on its own.

The device has three buttons, an OLED display, and an I2C soil sensor. The sensor reads soil moisture and temperature, and the screen shows the readings along with a simple status such as Too Dry, Good, or Too Wet.

The firmware also uses plant profiles. Each profile stores the moisture and temperature ranges for a specific plant, you can edit this with the database in the github.

Features

  • Seeed Studio XIAO RP2040
  • Three MX-style switches
  • SSD1306 I2C OLED
  • I2C capacitive soil sensor
  • Custom two-layer PCB
  • Custom 3D-printed enclosure
  • USB-C power
  • Plant profile system
  • Moisture and temperature shown together
  • Gerber, drill, and STEP files included

Project Views

Top ViewFront ViewPCB View
Top viewFront viewPCB view

How It Works

The soil sensor sends moisture and temperature readings to the XIAO RP2040 over I2C.

The firmware compares the readings with the selected plant profile. The OLED then shows the plant name, moisture, temperature, and status.

The three buttons are used to refresh the readings, change the plant profile, and control the display.

Button Functions

ButtonFunction
SW1Refresh the sensor readings
SW2Change the plant profile
SW3Turn the display on or off

Hardware

PartDetails
MicrocontrollerSeeed Studio XIAO RP2040
Display128×64 SSD1306 I2C OLED
SensorI2C soil moisture and temperature sensor
InputsThree MX-style switches
PowerUSB-C
PCBCustom two-layer KiCad PCB
Enclosure3D-printed top and bottom case

PCB

The PCB was designed in KiCad and is about 62.5 mm by 62.5 mm.

It includes:

  • The XIAO RP2040
  • Three switch footprints
  • OLED header
  • Soil sensor header
  • Four 2.5 mm mounting holes

Cad

The pad was designed in Onshape.

I added the PCB model to the CAD assembly so I could check the mounting holes, headers, USB-C port, switches, OLED, and cable opening.

The mounting holes and clearances were corrected after checking the PCB inside the case.

Firmware

The firmware is designed to:

  • Read the soil sensor
  • Show moisture and temperature
  • Compare readings with plant profiles
  • Show simple status messages
  • Change profiles with SW2
  • Refresh readings with SW1
  • Control the display with SW3

Parts

9
QtyValueFootprintReferences
3SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3
2Conn_01x04Connector:FanPinHeader_1x04_P2.54mm_VerticalOLED1, SoilDectector1
1MOUDLE-SEEEDUINO-XIAOfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1

The 6 most common of 9 parts.

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the HackPad Orgins PCB?

It measures 62.5 × 62.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HackPad Orgins use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HackPad Orgins KiCad files?

From the percentchunk/Smart-Garden-Probe repository on GitHub, at the commit this page was made from: the board is Pcb/HackPad Orgins.kicad_pcb and its schematic Pcb/HackPad Orgins.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HackPad Orgins design in my own project?

Its repository states no licence, so its author keeps all rights: ask percentchunk before reusing the design.