Skip to the content
2 layers100 × 160 mmPatch1, the printed circuit board in 3D
Size
100 × 160 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
6
Pads
14
Tracks, vias
3, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
24 Nov 2022
Updated
24 Nov 2022

Overview

Patch1 is an open-source printed circuit board by pepijndevos, from the pepijndevos/gps_sao repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 100 × 160 mm with 6 parts on 6 nets, routed with 3 tracks and 0 vias.

README

README.md

gps_sao

Parts

6
QtyValueFootprintReferences
4Conn_Coaxialantennas:coaxJ1, J2, J3, J4
1Antennaantennas:patch_antenna_1.6ghz_cpAE1
1Antennaantennas:patch_antenna_1.6ghzAE2

More from pepijndevos/gps_sao

1
  • 2 layers88 × 70 mmPatch2, the printed circuit board in 3D

    Patch2

    pepijndevos/gps_sao

    3 parts23Apache-2.0

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the Patch1 PCB?

It measures 100 × 160 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Patch1 use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Patch1 KiCad files?

From the pepijndevos/gps_sao repository on GitHub, at the commit this page was made from: the board is patch1/patch1.kicad_pcb and its schematic patch1/patch1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Patch1 design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).