2 layers52.8 × 55 mm
ILDAWaveX16
stanleyondrus/ILDAWaveX16
ILDAWaveX16 is an open-source, high-resolution, wireless laser DAC with SD-card playback, network control, and ILDA output.
95 parts42
2 layers96.8 × 66.9 mm
LED Display PCB
Pegoku/LED-Display- Size
- 96.8 × 66.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 1,363
- Nets
- 1,358
- Pads
- 4,790
- Tracks, vias
- 7,168, 1,537
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Aug 2025
- Updated
- 15 Sep 2025
Overview
LED Display PCB is an open-source printed circuit board by Pegoku, from the Pegoku/LED-Display repository on GitHub. It is a 2-layer board of 96.8 × 66.9 mm with 1,363 parts on 1,358 nets, routed with 7,168 tracks and 1,537 vias.
It is built around the XL-1010RGBC-WS2812B-DZ. Its parts include 1,024 ICs, 300 capacitors, 19 connectors and 16 resistors. It belongs with the lEDs and displays boards of this library.
Main components
1README
README.mdname: "Pere Gomila" slack_handle: "@Pegoku" github_handle: "@Pegoku"
LED-Display
This is a custom mini LED display. Total of 1024 WS2812B in a small 64x64mm form factor
Estimated cost: ~$169
Features
- Easy to display text and simple graphics
- WS2812B based
- High power (not recommended to run at max power due to thin traces and high heat)
- Theoretical max refresh rate of 500Hz
Images
Parts
1,363| Qty | Value | Footprint | References |
|---|---|---|---|
| 1024 | XL-1010RGBC-WS2812B | easyeda2kicad:LED-SMD_4P-L1.0-W1.0-TL_XL-1010RGBC-WS2812B | U1, U10, U100, U101, U1000, U1001, U1002, U1003, U1004, U1005, U1006, U1007, U1008, U1009, U1010, U1011 +1008 |
| 300 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +284 |
| 18 | Conn_01x01 | TestPoint:TestPoint_Pad_2.0x2.0mm | J1, J2, J3, J4, J5, J6, J7, J10, J11, J12, J13, J14, J15, J16, J17, J18 +2 |
| 16 | 500 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 4 | VAL** | Panelization:mouse-bite-2mm-slot | mouse-bite-2mm-slot, mouse-bite-2mm-slot1, mouse-bite-2mm-slot2, mouse-bite-2mm-slot3 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J20 |
Questions
How big is the LED Display PCB PCB?
It measures 96.8 × 66.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LED Display PCB use?
1,363 parts, built around the XL-1010RGBC-WS2812B-DZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED Display PCB KiCad files?
From the Pegoku/LED-Display repository on GitHub, at the commit this page was made from: the board is src/LED-Display-PCB.kicad_pcb and its schematic src/LED-Display-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED Display PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Pegoku before reusing the design.
Similar boards
- 2 layers30 × 30 mm
SoundMixer
LeKoYa/SoundMixer
A deej-powered Soundmixer for individual volume control with rotary encoders, leds, buttons and oled support
41 parts41MIT - 2 layers111.2 × 210.4 mm
- 8 layers35 × 35 mm
OpenAIO
OpenDrone-hw/OpenAIO
Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.
343 parts19CERN-OHL-S-2.0 - 6 layers17 × 15.7 mm
OpenRX Gemini
OpenDrone-hw/OpenRX-Gemini
Open-source dual-radio, dual-band ExpressLRS receiver for Gemini and Xrossband.
86 parts11CERN-OHL-S-2.0 - 2 layers60 × 50 mm
- 2 layers76.1 × 87.9 mm
- 6 layers10 × 11.5 mm
OpenRX Lite
OpenDrone-hw/OpenRX-Lite
Open-source 2.4 GHz ExpressLRS receiver with an on-board ceramic antenna.
47 parts6CERN-OHL-S-2.0