
Tmc2208-adapter
pedrominatel/esp-rcnow
ESP-IDF project for remote control based on the ESP-NOW protocol.

ESP-IDF project for remote control based on the ESP-NOW protocol.
Receiver esp32-c6 is an open-source printed circuit board by pedrominatel, from the pedrominatel/esp-rcnow repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 40 × 70 mm with 47 parts on 51 nets, routed with 327 tracks and 100 vias.
It is built around the ESP32-C6-WROOM-1-N8, MT3608 and ULN2003. Its parts include 14 resistors, 11 connectors, 6 capacitors, 5 ICs and 3 diodes. It belongs with the ESP32 and RISC-V boards of this library.
ESP-IDF project for remote control based on the ESP-NOW protocol.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10kR 1% | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R9, R10, R11, R13, R14 |
| 4 | 22uF 30V | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C7 |
| 4 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3, J11 |
| 4 | MountingHole | MountingHole:MountingHole_4mm_Pad_TopBottom | H1, H2, H3, H4 |
| 2 | 15kR 1% | Resistor_SMD:R_0603_1608Metric | R2, R8 |
| 2 | 4.7uH | Inductor_SMD:L_Changjiang_FNR5020S | L1, L2 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4, J5 |
| 2 | D_Schottky | Diode_SMD:D_SMF | D1, D4 |
| 2 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U3, U4 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 110kR 1% | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1kR 1% | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 68kR 1% | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | ??? | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_Vertical_SMD | J12 |
| 1 | Conn_02x04_Counter_Clockwise | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J7 |
| 1 | ESP32-C6-WROOM-1 | PCM_Espressif:ESP32-C6-WROOM-1 | U1 |
| 1 | INA226 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U5 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW2 |
| 1 | SW_Push_DPDT | Minatel Library:Switch-6P-2way | SW1 |
| 1 | ULN2003 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U2 |

pedrominatel/esp-rcnow
ESP-IDF project for remote control based on the ESP-NOW protocol.

rajeev2705/PROJECTS
Welcome to my PCB projects repository! This space is dedicated to documenting my journey in designing, creating, and improving printed circuit boards (PCBs).


jfm92/everAliveSensor
Solar-powered BLE environmental sensor (temp, humidity, pressure) with a 50F supercapacitor — potentially infinite lifetime, 19-day dark autonomy. ESP32 + BME680. Experimental.




Nicolai-Electronics/tanmatsu-hardware
Hardware design of the Tanmatsu mainboard
It measures 40 × 70 mm and has 4 copper layers, 1.6 mm thick.
47 parts, built around the ESP32-C6-WROOM-1-N8, MT3608 and ULN2003. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pedrominatel/esp-rcnow repository on GitHub, at the commit this page was made from: the board is hardware/receiver-esp32-c6/receiver-esp32-c6.kicad_pcb and its schematic hardware/receiver-esp32-c6/receiver-esp32-c6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).