Skip to the content
2 layers55.9 × 82.6 mmEight channel argb, the printed circuit board in 3D

Kicad PCB for creating a simple ESP32 based open source 8-channel ARGB controller for PC 5v ARGB devices, or any other WS2812 5v LED strips.

Size
55.9 × 82.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
39
Pads
89
Tracks, vias
135, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
15 Mar 2021
Updated
15 Mar 2021

Overview

Eight channel argb is an open-source printed circuit board by peacepenguin, from the peacepenguin/esp32-argb-PCB repository on GitHub. It is a 2-layer board of 55.9 × 82.6 mm with 14 parts on 39 nets, routed with 135 tracks and 0 vias.

Its parts include 10 connectors, 2 ICs and 1 switch. It belongs with the ESP32 boards of this library.

README

readme.md

Kicad PCB for creating a simple ESP32 based open source 8-channel ARGB controller for PC 5v ARGB devices, or any other WS2812 5v LED strips.

Works well paired with "WLED" esp32 software. Using "multi-pin" fork found here: https://github.com/peacepenguin/WLED

WLED works with "OpenRGB" via serial too. So you can integrate this hardware design into a system controlled by OpenRGB via the "TPM2" serial protocol.

Hardware footprint based on 30-pin "Devkit v1" (15 pins on each side): https://www.aliexpress.com/item/1005001648850998.html

Also expects 74HCT245N 8-channel level shifter, and 8x JST-XH angle headers.

ESP32 footprint used in Kicad is by Victor Lamoine, licensed BSD-3-Clause-Attribution License 'This product includes software developed by Victor Lamoine.'

74HCT245N footprint by SnapEDA:

#(c) SnapEDA 2016 (snapeda.com) #This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA) with Design Exception 1.0

Parts

14
QtyValueFootprintReferences
8Conn_01x03Connector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_HorizontalJ1, J2, J3, J4, J5, J6, J7, J8
2Conn_01x06_MaleConnector_JST:JST_XH_S6B-XH-A_1x06_P2.50mm_HorizontalJ9, J10
174HCT245Nhct:DIP254P762X420-20U2
1ESP32_DevKit_V1_DOITesp32:esp32_devkit_v1_doitU1
1MountingHole_3.2mm_M3MountingHole:MountingHole_3.2mm_M3M3
1SW_DIP_x01Button_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfileSW1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Eight channel argb PCB?

It measures 55.9 × 82.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Eight channel argb use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Eight channel argb KiCad files?

From the peacepenguin/esp32-argb-PCB repository on GitHub, at the commit this page was made from: the board is eight channel argb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Eight channel argb design in my own project?

Its repository states no licence, so its author keeps all rights: ask peacepenguin before reusing the design.