

Teensybig oled plain
Teensy LC with Adafruit 128x64 OLED
- Size
- 40.4 × 55.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 34
- Pads
- 41
- Tracks, vias
- 75, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Jun 2016
- Updated
- 11 Aug 2016
Overview
Teensybig oled plain is an open-source printed circuit board by pdp7, from the pdp7/teensy-big-oled repository on GitHub. It is a 2-layer board of 40.4 × 55.1 mm with 10 parts on 34 nets, routed with 75 tracks and 10 vias.
It belongs with the lEDs and displays boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
README
README.mdDescription
Teensy LC with SPI 128x64 OLED and Cap Touch
OSH Park Shared Project
- Teensy LC with OLED & Touch (f37453f)
- File: teensybig-oled.kicad_pcb
- Commit: f37453f
Bill of Materials:
Known Issue:
- OLED GND not connected to GND plane
- Fix: solder wire from OLED GND to TEENSY GND
License
This project released under the CERN Open Hardware v1.2 License
Note: Arduino sketch contains code written by Limor Fried & Kevin Townsend for Adafruit Industries and is covered by BSD license
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | LOGO | oshpark:oshw | G*** |
| 1 | LOGO | teensy-big-oled:oshw-1-front-silk-normal | G*** |
| 1 | OLED_128x64 | Wickerlib:Pin_Header_Straight_1x08 | J2 |
| 1 | TEENSY-LC | Wickerlib:TEENSY-LC | J1 |
The 4 most common of 10 parts.
More from pdp7/teensy-big-oled
4- 2 layers42.2 × 32.3 mm

- 2 layers41.1 × 29.7 mm

- 2 layers40.1 × 34 mm

- 2 layers41.4 × 32 mm

Similar boards
- 2 layers57 × 55.2 mm

LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm

Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm

Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm

- 2 layers44.3 × 30.5 mm

Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm

Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm

Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the Teensybig oled plain PCB?
It measures 40.4 × 55.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Teensybig oled plain use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Teensybig oled plain KiCad files?
From the pdp7/teensy-big-oled repository on GitHub, at the commit this page was made from: the board is teensybig-oled-plain.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Teensybig oled plain design in my own project?
Its repository states no licence, so its author keeps all rights: ask pdp7 before reusing the design.