2 layers78.5 × 61 mm
KiCad PCB Assessment
iamkaifpathaan/KiCad-PCB-Assessment
PCB design assessment in KiCad - schematic to fabrication-ready manufacturing files
28 partsMIT
2 layers38.5 × 67.3 mm
Temperature pcb
pavanatgitgub/esp32_temperature_pcb_sensorAssignment
- Size
- 38.5 × 67.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 48
- Pads
- 133
- Tracks, vias
- 181, 59
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Nov 2025
- Updated
- 25 Nov 2025
Overview
Temperature pcb is an open-source printed circuit board by pavanatgitgub, from the pavanatgitgub/esp32_temperature_pcb_sensor repository on GitHub. It is a 2-layer board of 38.5 × 67.3 mm with 32 parts on 48 nets, routed with 181 tracks and 59 vias.
It is built around the ESP32-WROOM-32, MP1584EN and DHT11, with the SS34, TS-1088-AR02016 and SMBJ12A among its other parts. Its parts include 11 resistors, 9 capacitors, 4 diodes, 2 ICs and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
6
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMP1584EN
SOIC-8-EP-20℃~+85℃ 1 100kHz~1.5MHz 4.5V~28V Adjustable Buck Buck Built-in SOIC-8-EP DC-DC Converters ROHSMonolithic Power SystemsDC-DC Converters
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
SMBJ12A
SMB-65℃~+150℃ 12V 14.7V 19.9V 1uA 30.2A 390pF 600W@10/1000us TVS SMB ESD and Surge Protection (TVS/ESD) ROHS晶导微电子ESD And Surge Protection (TVS/ESD)
README
README.mdesp32_temperature_pcb_sensor
Assignment
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R7 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C8 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C7 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | SS34 | Diode_SMD:D_SMA | D1, D4 |
| 2 | TS-1088-AR02016 | TS-1088-AR02016:SW_TS-1088-AR02016 | BOOT1, RESET1 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 220pF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 31.6k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 4.7K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 5.1k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 68k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J1 |
| 1 | DHT11 | DHT11:SENSOR-DHT11 | SENS-1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | LED | LED_SMD:LED_2010_5025Metric | D2 |
| 1 | MP1584EN | MP1584EN:SOIC127P600X170-9N | U2 |
| 1 | SMBJ12A | SMBJ12A:DIOM4336X265N | D3 |
Similar boards
- 2 layers45 × 55 mm
DongleALIVEv2.0
joaogabrielsantosD/Dongle-eaLIVE-PCB
PCB of the DongleEALIVE for reading data from the vehicle's CAN bus with telemetry via BLE, supporting GPS and accelerometer.
77 parts1 - 2 layers93.4 × 87.4 mm
- 2 layers45.7 × 45.8 mm
- 4 layers32 × 55 mm
Furuta pendulum
MHVandborg/furuta_pendulum
A Furuta (rotary inverted) pendulum system controlled by a neural network running on a custom PCB.
67 parts - 2 layers70 × 100 mm
Lower
sbarisic/MagMouse
Open source hall-effect based mouse - no mechanical contacts - no failure points
128 parts2 - 2 layers
OpenPowerDistribution
ulikoehler/OpenPowerDistributor
Open-hardware PCB to distribute DC 12V power to 12V / 5V / 9V & 24V consumers
537 partsCC0-1.0 - 4 layers110 × 122.3 mm
Walking spider robot
DziadekMateusz/Walking_spider_robot_PCB
Custom control board for a spider robot. Based on the STM32F103C8T6 microcontroller. Features dedicated 5V power supplies for eight servo motors, USB-C programming, Li-Po 2S power input, onboard protection circuits…
146 parts
Questions
How big is the Temperature pcb PCB?
It measures 38.5 × 67.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Temperature pcb use?
32 parts, built around the ESP32-WROOM-32, MP1584EN, DHT11 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Temperature pcb KiCad files?
From the pavanatgitgub/esp32_temperature_pcb_sensor repository on GitHub, at the commit this page was made from: the board is Temperature_pcb.kicad_pcb and its schematic Temperature_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Temperature pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask pavanatgitgub before reusing the design.