2 layers50 × 35 mm
2 layers55.9 × 83.8 mm
Picostation pcb
paulocode/picostation_pcb87- Size
- 55.9 × 83.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 37
- Pads
- 112
- Tracks, vias
- 396, 126
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Dec 2022
- Updated
- 22 Feb 2023
Overview
Picostation pcb is an open-source printed circuit board by paulocode, from the paulocode/picostation_pcb repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 55.9 × 83.8 mm with 17 parts on 37 nets, routed with 396 tracks and 126 vias.
Its parts include 4 connectors, 2 capacitors, 2 diodes, 1 resistor and 1 IC. It belongs with the RP2040 boards of this library.
README
README.mdpicostation_pcb
| ID | PART |
|---|---|
| C2 | 0805 10uF |
| C3 | 0805 10uF |
| D1 | SOD-123 1N5819 |
| D2 | 0805 LED |
| J1 | SD card adaptor https://amzn.to/3Igir0n] |
| J2 | 20-pin 1mm pitch FFC socket, bottom contact https://amzn.to/3WJF29v] |
| J3 | Raspberry Pi Pico |
| R2 | 0603 4.7kΩ |
| U1 | TO-252 7805 https://amzn.to/3VBOSJq |
| Cable | 20-pin 1mm pitch FFC cable, inverted (one side up, one side down), 200mm length |
- Links are samples only, I did not buy from them.
- You can harvest a TO-252 7805 from PlayStation boards.
- Software for this project is NOT yet released as of Jan 2023
- The FFC cable is the same one that comes with an Xstation
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.5mm | MountingHole:MountingHole_3.5mm | MH1, MH2, MH3, MH4 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Conn_01x06_Female | paulo:SD | J1 |
| 1 | Conn_01x20_Female | Connector_FFC-FPC:TE_2-84952-0_1x20-1MP_P1.0mm_Horizontal | J2 |
| 1 | Conn_02x10_Female | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J4 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LM78M05_TO252 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | PICO | PICO:PICO | J3 |
Similar boards
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
Questions
How big is the Picostation pcb PCB?
It measures 55.9 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Picostation pcb use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Picostation pcb KiCad files?
From the paulocode/picostation_pcb repository on GitHub, at the commit this page was made from: the board is picostation_pcb.kicad_pcb and its schematic picostation_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Picostation pcb design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).