
HadesGPSDongle
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.

Victor9K pga2350 is an open-source printed circuit board by pauldevine, from the pauldevine/pico_v9k repository on GitHub. It is a 4-layer board of 232.7 × 134.3 mm with 27 parts on 76 nets, routed with 792 tracks and 66 vias.
It is built around the SN74LVC1G04QDCKRQ1. Its parts include 10 capacitors, 4 resistors, 4 connectors, 2 diodes and 1 IC. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1µF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4, C5, C6, C11, C12 |
| 2 | 10µF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C10 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | 5K1 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 1 | .01µF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C7 |
| 1 | 100µF | Capacitor_THT:CP_Axial_L11.0mm_D8.0mm_P15.00mm_Horizontal | C1 |
| 1 | 1µF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 2.2KΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4 |
| 1 | 2.7KΩ | Resistor_THT:R_Array_SIP4 | RN2 |
| 1 | 470Ω | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 47KΩ | Victor9000:4609X101473LF | RN1 |
| 1 | BOOTSEL | Victor9000:B3FS1010P | SW1 |
| 1 | Micro_SD_Card | Victor9000:HRS_DM3AT-SF-PEJM5 | Jd1 |
| 1 | PICO DEBUG | Victor9000:CONN_BM03B-SRSS-TBLFSN_JST | J1 |
| 1 | Pimoroni_PGA2350 | Victor9000:pimoroni_pga2350 | A1 |
| 1 | SN74LVC1G04QDCKRQ1 | Victor9000:SOT65P210X110-5N | IC1 |
| 1 | SPI Breakout | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | USB C DX07S016JA1R1500 | Victor9000:JAE_DX07S016JA1R1500 | J4 |
| 1 | Victor 9K Expansion Port | Victor9000:Victor_Gold_Fingers_3 | GF1 |

pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.


loxodes/vna
Under development open hardware microwave vector network analyzer


MitkoDyakov/Calipatron
I design my own digital caliper based on STM32F103C8T6 blue pill.



alexbegoon/meshimi
Meshimi unlocks powerful mesh networking for your Flipper Zero combining Meshtastic, LoRaWAN and other protocols like Matter and Thread to give you rock‑solid connectivity across miles, even off‑grid.
It measures 232.7 × 134.3 mm and has 4 copper layers, 1.6 mm thick.
27 parts, built around the SN74LVC1G04QDCKRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pauldevine/pico_v9k repository on GitHub, at the commit this page was made from: the board is hardware/Victor9K_pga2350.kicad_pcb and its schematic hardware/Victor9K_pga2350.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pauldevine before reusing the design.