
NerdQX
IxTechCrypto/NerdQX
The NerdQX was developed as the world's first multi-ASIC home miner for overclocking, which also enables extremely efficient mining.

8-Asic Miner based on the NerdQaxe
Nerd8 is an open-source printed circuit board by Patsch91, from the Patsch91/NerdOCTAXE-Gamma repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 6-layer board of 200 × 190 mm with 471 parts on 268 nets, routed with 3,068 tracks and 1,966 vias.
It is built around the CSD95472Q5MC, TMP1075D and TMUX1109RSVR, with the TXU0304PW, BLM21PG221SN1D and BLE32SN120SN1L among its other parts. Its parts include 331 capacitors, 63 resistors, 30 ICs, 7 inductors and 3 diodes.
**NerdOCTAXE-γ Rev3.4 **
Rev3.4:
The NerdOCTAXEγ runs with a modified version of the AxeOS: ESP-Miner-NerdQAxe+ (Releases for NerdOCTAXE-Gamma)
To flash the Lilygo T-Display you can use the Webflasher
DISCLAIMER: This device is an highly advanced build and partly WIP. To get 8 Asics and the voltage regulator soldered properly can be very hard and frustrating if you are not used to soldering Asics or soldering in general. Using that amount of power, this device isn't a toy and you should know what you are doing - stay safe! Also this device is not intended or designed to run overclocked.
PCB: For example with the JLC Plugin for Kicad you can export the files out of Kicad to order directly from JLCPCB or any other PCB-Manufacturer. I tested my prototype with 1oz on inner and outer layers... working nice :) If anyone is testing 2/1oz or 2/2oz please let me know of the results you are seeing!
BOM: You can directly upload the .csv in this repo to Digikey. You will have to order the Lilygo T-Display S3 and the XT60PW-M seperately
HEATSINKS: For this build I used two Thermalright AXP90-X53
ASICS: This board utilizes Bitmains BM1370-Series. I tested boards with the following variants: BM1370BC < BM1370PA < BM1370PF
If you like this project and want to support future work, feel free to donate to:
bc1q0ctaxeha3lpsaaz7kpjulflw2d9p66fhkp48dk
or related projects without which this project would not have been possible for me:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 100 | 1µ/25V | Capacitor_SMD:C_0805_2012Metric | C105, C108, C121, C123, C124, C125, C126, C127, C128, C129, C130, C131, C132, C134, C137, C139 +84 |
| 92 | 100µF | Capacitor_SMD:C_1206_3216Metric | C21, C22, C24, C184, C185, C186, C187, C188, C189, C193, C194, C206, C223, C224, C238, C239 +76 |
| 66 | 10uF | Capacitor_SMD:C_0603_1608Metric | C111, C112, C113, C117, C118, C122, C133, C135, C136, C138, C149, C151, C152, C154, C165, C170 +50 |
| 23 | 100n/0.7mm | Capacitor_SMD:C_0805_2012Metric | C10, C11, C14, C16, C101, C102, C103, C107, C176, C178, C198, C200, C210, C229, C230, C233 +7 |
| 14 | , , , , , , , , , , , , , | ||
| 14 | 10k | Resistor_SMD:R_0805_2012Metric | R8, R10, R14, R16, R18, R20, R22, R24, R31, R36, R37, R38, R42, R57 |
| 12 | 2R/1W | Resistor_SMD:R_1206_3216Metric | R27, R58, R59, R60, R61, R62, R63, R64, R65, R66, R67, R68 |
| 11 | 1n/0.7mm | Capacitor_SMD:C_0805_2012Metric | C2, C4, C9, C109, C110, C180, C202, C212, C232, C237, C327 |
| 8 | 1k | Resistor_SMD:R_0805_2012Metric | R9, R11, R15, R17, R19, R21, R23, R41 |
| 8 | BM1370_mode1 | Nerd8:BM1370 | U2, U9, U10, U11, U12, U13, U14, U15 |
| 7 | 10µ | Capacitor_SMD:C_0805_2012Metric | C100, C119, C120, C183, C217, C325, C326 |
| 6 | 100 | Resistor_SMD:R_0805_2012Metric | R39, R40, R51, R54, R55, R56 |
| 6 | 1R/0.5W | Resistor_SMD:R_0805_2012Metric | R25, R26, R45, R47, R49, R52 |
| 6 | 2.2µ | Capacitor_SMD:C_0805_2012Metric | C12, C13, C177, C199, C214, C234 |
| 6 | 220nH | Nerd8:IFLR-4031GC-01-8x10 | L1, L2, L4, L5, L6, L7 |
| 6 | 6.8n | Capacitor_SMD:C_0805_2012Metric | C18, C19, C179, C201, C231, C236 |
| 6 | CSD95472Q5MC | Nerd8:CSD95472-SON-5x6 | U1, U4, U5, U16, U18, U19 |
| 5 | 220µ/25V | Capacitor_SMD:CP_Elec_8x10 | C92, C190, C208, C218, C329 |
| 5 | BLM21PG221SN1D | Resistor_SMD:R_0805_2012Metric | FB1, FB2, FB3, FB4, FB5 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C205, C213, C220, C328 |
| 4 | 2.7k | Resistor_SMD:R_0805_2012Metric | R33, R35, R43, R44 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 3 | 22p | Capacitor_SMD:C_0603_1608Metric | C114, C115, C116 |
| 3 | BLE32SN120SN1L | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | FB6, FB7, FB8 |
| 3 | TMP1075 | Nerd8:TMP1075-DRL | U17, U37, U38 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric | R29, R30 |
| 2 | 10µ | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C167, C168 |
| 2 | 2.2R/0.5W | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 2 | Fan_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1, M2 |
| 2 | TMUX1109RSVR | Package_DFN_QFN:UQFN-16_1.8x2.6mm_P0.4mm | U21, U23 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C104 |
| 1 | 121k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 12p | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 16.2k | Resistor_SMD:R_0805_2012Metric | R34 |
| 1 | 16.5k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123 | D3 |
| 1 | 2.2n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2.55k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 22µ/16V | Capacitor_SMD:C_1206_3216Metric | C106 |
| 1 | 24.3k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 24.9k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 25MHz | Oscillator:Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm | U8 |
| 1 | 330n | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 3568 | 8Axe:Fuseholder Blade_3568 | F1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | 4.7µ | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 4.7µH/2.3A/2.7A | Inductor_SMD:L_Taiyo-Yuden_NR-50xx | L3 |
| 1 | 8.06k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 84.5k | Resistor_SMD:R_0805_2012Metric | R32 |
| 1 | AP3211 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | Conn_01x06 | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J2 |
| 1 | Connector 02x01 | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J10 |
| 1 | EMC2302-1 | Package_SO:MSOP-10_3x3mm_P0.5mm | U32 |
| 1 | MCP1824T-0802E | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | MCP1824T-1202E | Package_TO_SOT_SMD:SOT-23-5 | U36 |
| 1 | PMEG4030EP,115 | Diode_SMD:D_SOD-128 | D2 |
| 1 | SMBJ12A | Diode_SMD:D_SMB | D1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | T-Display-S3 | myfootprints:T-Display-S3 | U30 |
| 1 | TMP451A | Nerd8:WSON-8_2x2mm_P0.5mm_EP0.9x1.6mm | U20 |
| 1 | TMP451J | Nerd8:WSON-8_2x2mm_P0.5mm_EP0.9x1.6mm | U22 |
| 1 | TPS53667 | Package_DFN_QFN:Texas_RHA0040B_VQFN-40-1EP_6x6mm_P0.5mm_EP4.15x4.15mm_ThermalVias | U3 |
| 1 | TXU0102-DCU | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U33 |
| 1 | TXU0304PW | Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm | U35 |
The 467 most common of 471 parts.

IxTechCrypto/NerdQX
The NerdQX was developed as the world's first multi-ASIC home miner for overclocking, which also enables extremely efficient mining.



pacovalverde/nerdquaxe
Copia del proyecto de NerdQaxe de SHUFPS qaxe.git

phil31/NerdEKO-Gamma
fork of the NerdOCTAXE-Gamma design (https://github.com/Patsch91/NerdOCTAXE-Gamma), with 12 x BM1370 (14TH/s SHA256)



It measures 200 × 190 mm and has 6 copper layers, 1.6 mm thick.
471 parts, built around the CSD95472Q5MC, TMP1075D, TMUX1109RSVR and TXU0304PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Patsch91/NerdOCTAXE-Gamma repository on GitHub, at the commit this page was made from: the board is Nerd8.kicad_pcb and its schematic Asic0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).