Skip to the content
2 layers58 × 60 mmHackpad, the printed circuit board in 3D

Small hackpad with 6 keys, Oled display, Rotary Encoder

Size
58 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
20
Pads
67
Tracks, vias
116, 1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Aug 2026
Updated
19 Aug 2026

Overview

Hackpad is an open-source printed circuit board by patriq128, from the patriq128/ZiDi_Hackpad repository on GitHub, published under the MIT licence. It is a 2-layer board of 58 × 60 mm with 15 parts on 20 nets, routed with 116 tracks and 1 via.

Its parts include 7 switches, 6 diodes and 2 ICs. It belongs with the lEDs and displays boards and the RP2040 boards of this library.

README

README.md

ZiDi_Hackpad

My Hackpad is a 6-key macropad with an OLED display, rotary encoder, and my own custom firmware.

Features

  • 6 keys in a matrix
  • EC11 rotary encoder
  • 128x32 OLED display
  • Custom firmware

CAD Model

I am not very experienced with CAD, but I gave it a try.

The case is held together with 4 M3 bolts and heat-set inserts. The PCB is not directly mounted to the case; instead, it is supported by external supports that keep it securely in position.

The case consists of two parts: a bottom and a top. I left a small gap between the parts to make sure they fit together properly.

case1 case2

Made in Onshape.

PCB

The PCB was designed in KiCad.

Schematic

schematic

The schematic is quite basic, but it works.

PCB

pcb

View PCB on KiCanvas

Firmware

I decided to make the firmware a separate project, so you can find it here:

PadeXa

The Firmware folder contains everything you need to run the firmware, including a conf.json file with some example modes.

The production folder contains firmware.uf2, which is the CircuitPython firmware compiled and packaged as a UF2 file, ready to be flashed onto the device.

Want to create something similar yourself? Check out this guide: Create Custom UF2 File for Easy CircuitPython Flashing

BOM

  • 6x Cherry MX switches
  • 6x DSA keycaps
  • 6x 1N4148 DO-35 diodes
  • 1x 0.91" 128x32 OLED display
  • 1x EC11 rotary encoder
  • 1x XIAO RP2040
  • 4x M3x16mm screws
  • 4x M3x5mm heat-set inserts
  • 1x 3D-printed case

Parts

15
QtyValueFootprintReferences
61N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D6
6SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6
1ER_OLEDM0.91_1x-I2CDisplay:ER_OLEDM0.91_1x-I2CU2
1MOUDLE-SEEEDUINO-XIAOfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW7

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Hackpad PCB?

It measures 58 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Hackpad use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hackpad KiCad files?

From the patriq128/ZiDi_Hackpad repository on GitHub, at the commit this page was made from: the board is PCB/hackpad.kicad_pcb and its schematic PCB/hackpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hackpad design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).