2 layers20.5 × 24.8 mm
2 layers35.6 × 21.6 mm
Lumos
patrickod/lumosa simple LED backlight for my monitor
- Size
- 35.6 × 21.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 8
- Pads
- 29
- Tracks, vias
- 58, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Feb 2016
- Updated
- 8 Feb 2016
Overview
Lumos is an open-source printed circuit board by patrickod, from the patrickod/lumos repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 35.6 × 21.6 mm with 8 parts on 8 nets, routed with 58 tracks and 0 vias.
Its parts include 3 connectors, 1 capacitor, 1 resistor, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uf | Capacitors_ThroughHole:C_Disc_D7.5_P5 | C1 |
| 1 | 10k | Resistors_ThroughHole:Resistor_Vertical_RM5mm | R1 |
| 1 | ATTINY85-P | MCU-ATTINY85-20PU_DIP8_:DIP254P762X533-8 | IC1 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | LDP8806 | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | SPI | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
| 1 | SW_PUSH | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW1 |
The 7 most common of 8 parts.
Questions
How big is the Lumos PCB?
It measures 35.6 × 21.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lumos use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lumos KiCad files?
From the patrickod/lumos repository on GitHub, at the commit this page was made from: the board is lumos.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lumos design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0