2 layers164 × 126.5 mm
2 layers
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 78
- Pads
- 212
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Aug 2026
- Updated
- 7 Nov 2026
Overview
Facade is an open-source printed circuit board by patricecouillard-code, from the patricecouillard-code/TrailerDiagnosticSystem repository on GitHub. It is a 2-layer board with 33 parts on 78 nets.
It is built around the WP154A4SEJ3VBDZGW/CA, CMI-1295IC-0585T and N3314-6302RB, with the N3429-6302RB and N3431-6302RB among its other parts. Its parts include 15 diodes, 12 connectors and 5 resistors.
Main components
5
WP154A4SEJ3VBDZGW/CA
插件,D=5mm60° Common Anode White Lens 插件,D=5mm RGB LEDs ROHSKingbrightRGB LEDs
CMI-1295IC-0585T
插件,D=12mm-30℃~+70℃ 10mm 12mm 2.4kHz 4V~7V 85dB Active Buzzer (Built-in Driving Circuit) Electromagnetic 插件,D=12mm Buzzers ROHSCUIBuzzersN3314-6302RB
插件,P=2.54mm插件,P=2.54mm IDC Connectors ROHS3MIDC ConnectorsN3429-6302RB
插件-55℃~+105℃ 125V 13 1A 2 2.54mm 26P 2x13P Black Copper alloy PCT Through Hole UL94V-0 插件 Wire To Board Connector ROHS3MWire To Board Connector
N3431-6302RB
插件34 Contacts - Straight .100''' x .100''' Low Profile Black Four-Wall Header (Long Roll Pin Latch/Ejectors), 3000 Series3MWire To Board Connector
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Micro-Fit 3.0 1x03 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J3301, J3401, J3402, J3403, J3404, J3405, J3406 |
| 6 | RGB 5mm CA | LED_THT:LED_D5.0mm-4_RGB_Staggered_Pins | D924, D1324, D1724, D2124, D2524, D2924 |
| 5 | RGB 5mm CA (rouge) | LED_THT:LED_D5.0mm-4_RGB_Staggered_Pins | D203, D3101, D3102, D3103, D3104 |
| 3 | RGB 5mm CA (ambre) | LED_THT:LED_D5.0mm-4_RGB_Staggered_Pins | D301, D1101, D2701 |
| 2 | 1.2kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3502, R3504 |
| 2 | 820Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3501, R3503 |
| 1 | 270Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3505 |
| 1 | Buzzer 5V | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ3101 |
| 1 | IDC 2x07 | Connector_IDC:IDC-Header_2x07_P2.54mm_Latch_Vertical | J3202 |
| 1 | IDC 2x13 | Connector_IDC:IDC-Header_2x13_P2.54mm_Latch_Vertical | J3201 |
| 1 | IDC 2x17 | Connector_IDC:IDC-Header_2x17_P2.54mm_Latch_Vertical | J3203 |
| 1 | Micro-Fit 3.0 1x05 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0515_1x05_P3.00mm_Vertical | J3302 |
| 1 | Micro-Fit 3.0 1x06 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0615_1x06_P3.00mm_Vertical | J3303 |
| 1 | OSX10201-GYR1 | OSX10201-GYR1:DIP760W45P254L2550H815Q20B | D201 |
Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431
Questions
What parts does the Facade use?
33 parts, built around the WP154A4SEJ3VBDZGW/CA, CMI-1295IC-0585T, N3314-6302RB and N3429-6302RB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Facade KiCad files?
From the patricecouillard-code/TrailerDiagnosticSystem repository on GitHub, at the commit this page was made from: the board is Facade/Facade.kicad_pcb and its schematic Alarmes_Buzzer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Facade design in my own project?
Its repository states no licence, so its author keeps all rights: ask patricecouillard-code before reusing the design.