

Sunbie FINAL FINAL FINAL smol1
Sunbie is a Tamagotchi inspired product that utilises a Waveshare ESP 32- C3 microprocessor. It uses sensors such as the ADXL345 and the DHT11 so as to gather data from the environment, it also has a sprite (in this…
- Size
- 96.3 × 96.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 22
- Pads
- 52
- Tracks, vias
- 124, 6
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Oct 2026
- Updated
- 26 Oct 2026
Overview
Sunbie FINAL FINAL FINAL smol1 is an open-source printed circuit board by parv20250-dot, from the parv20250-dot/Sunbie repository on GitHub. It is a 2-layer board of 96.3 × 96.9 mm with 19 parts on 22 nets, routed with 124 tracks and 6 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor.
Main components
1README
README.md#Sunbie
Sunbie is a Tamagotchi inspired product that utilises a Waveshare ESP 32- C3 microprocessor. It uses sensors such as the ADXL345 and the DHT11 so as to gather data from the environment, it also has a sprite (in this case a fox) that responds to any changes in the temperature. The accelerometer enables the user to interact with the sprite so as to feed her, play with her, pet her or (if she's sick) give her meds. You look after it by tilting the device to pick actions from a menu.
| Action | Joy | Energy | Fullness | Health |
|---|---|---|---|---|
| Nap | +1 | +18 | −4 | +3 |
| Play | +12 | −9 | −5 | −4 |
| Feed | +3 | −2 | +15 | +1 |
| Pet | +7 | +2 | 0 | 0 |
| Meds | −7 | −3 | 0 | +7 |
A 3d visual of the device on Kicad
Why was this made?
This was made as a part of Hack Club's Half Life programme.
Who is the sprite?
The sprite (pet) can be set to anything the user desires by changing the Bit Image in the source code. However, I use a fox. inspired by the image below.
The code is written in C++ Arduino framework and uses an SSDI306 OLED to display the fox and menu, an ADXL345 in order to detect tilts and also detect shaking (shake/dizzy pet reactions), a DHT11 for temperature and humidity readings and temperature reactions, and a buzzer for sounds. The pet is saved, it can be reset by setting RESET_SAVED_PET to true,uploading it and then setting it to false again!!
| Item | Part_Name | Description | Quantity | Unit_Cost | Total_Cost | Supplier |
|---|---|---|---|---|---|---|
| 1 | DHT-11 temperature and humidity sensor | It senses differences in the surroundings which react. | 1 | 3.91 | 3.91 | electro:kit |
| 2 | Resistor | Resistor for DHT11 data line | 1 | 0.10 | 0.10 | electro:kit |
| 3 | ADXL345 - I2C SPI | Accelerometer(motion sensor) it detects motion allowing for the Sunbie to react | 1 | 6.90 | 6.90 | electro:kit |
| 4 | ESP32-C3 developmentboard mini 4MB | The main controls,microprocessor in sunbie | 1 | 7.90 | 7.90 | electro:kit |
| 5 | OLED Display 0.96 inch I2C 128x64 pixels for RPi/Arduino/Atmega | Display for sunbie, allows it to show responses | 1 | 6.50 | 6.50 | jmux.se |
| 6 | pcb | Main part/base of whole pcb | 1 | 4.00 | 4.00 | jlc pcb |
| 7 | Passive piezo buzzer 70dB PS12 PCB ø12x6.5mm | play sound alongside reactions | 1 | 0.75 | 0.75 | electro:kit |
| 8 | WS Standard Linear Switch | Interaction with the device | 2 | 0.15 | 0.30 | Max Gaming |
| 9 | Tax & shipping | for the whole order | - | - | 2.00 | - |
Credits Made for Hack Club-Half Life
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x04_Pin | Imported Parts:Display_128x64_096_I2C | J2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | ~ | waveshareesp32:Waveshare-ESP32-C3-Zero | U1 |
Similar boards
- 2 layers96.6 × 82.8 mm

- 2 layers100 × 50 mm

Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm

- 2 layers

OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm

SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers

Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm

Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm

Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
How big is the Sunbie FINAL FINAL FINAL smol1 PCB?
It measures 96.3 × 96.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sunbie FINAL FINAL FINAL smol1 use?
19 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sunbie FINAL FINAL FINAL smol1 KiCad files?
From the parv20250-dot/Sunbie repository on GitHub, at the commit this page was made from: the board is sunbie FINAL FINAL FINAL smol1.kicad_pcb and its schematic sunbie FINAL FINAL FINAL smol1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sunbie FINAL FINAL FINAL smol1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask parv20250-dot before reusing the design.