Skip to the content
2 layers96.3 × 96.9 mmSunbie FINAL FINAL FINAL smol1, the printed circuit board in 3D

Sunbie FINAL FINAL FINAL smol1

parv20250-dot/Sunbie

Sunbie is a Tamagotchi inspired product that utilises a Waveshare ESP 32- C3 microprocessor. It uses sensors such as the ADXL345 and the DHT11 so as to gather data from the environment, it also has a sprite (in this…

Size
96.3 × 96.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
22
Pads
52
Tracks, vias
124, 6
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Oct 2026
Updated
26 Oct 2026

Overview

Sunbie FINAL FINAL FINAL smol1 is an open-source printed circuit board by parv20250-dot, from the parv20250-dot/Sunbie repository on GitHub. It is a 2-layer board of 96.3 × 96.9 mm with 19 parts on 22 nets, routed with 124 tracks and 6 vias.

It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor.

Main components

1

README

README.md

#Sunbie

Sunbie is a Tamagotchi inspired product that utilises a Waveshare ESP 32- C3 microprocessor. It uses sensors such as the ADXL345 and the DHT11 so as to gather data from the environment, it also has a sprite (in this case a fox) that responds to any changes in the temperature. The accelerometer enables the user to interact with the sprite so as to feed her, play with her, pet her or (if she's sick) give her meds. You look after it by tilting the device to pick actions from a menu.

pcb new 2 Annotation 2026-10-22 135644 Annotation 2026-10-22 135615
ActionJoyEnergyFullnessHealth
Nap+1+18−4+3
Play+12−9−5−4
Feed+3−2+15+1
Pet+7+200
Meds−7−30+7

A 3d visual of the device on Kicad

Why was this made?

This was made as a part of Hack Club's Half Life programme.

Who is the sprite?

The sprite (pet) can be set to anything the user desires by changing the Bit Image in the source code. However, I use a fox. inspired by the image below.

Annotation 2026-10-10 102953 (2)

The code is written in C++ Arduino framework and uses an SSDI306 OLED to display the fox and menu, an ADXL345 in order to detect tilts and also detect shaking (shake/dizzy pet reactions), a DHT11 for temperature and humidity readings and temperature reactions, and a buzzer for sounds. The pet is saved, it can be reset by setting RESET_SAVED_PET to true,uploading it and then setting it to false again!!

ItemPart_NameDescriptionQuantityUnit_CostTotal_CostSupplier
1DHT-11 temperature and humidity sensorIt senses differences in the surroundings which react.13.913.91electro:kit
2ResistorResistor for DHT11 data line10.100.10electro:kit
3ADXL345 - I2C SPIAccelerometer(motion sensor) it detects motion allowing for the Sunbie to react16.906.90electro:kit
4ESP32-C3 developmentboard mini 4MBThe main controls,microprocessor in sunbie17.907.90electro:kit
5OLED Display 0.96 inch I2C 128x64 pixels for RPi/Arduino/AtmegaDisplay for sunbie, allows it to show responses16.506.50jmux.se
6pcbMain part/base of whole pcb14.004.00jlc pcb
7Passive piezo buzzer 70dB PS12 PCB ø12x6.5mmplay sound alongside reactions10.750.75electro:kit
8WS Standard Linear SwitchInteraction with the device20.150.30Max Gaming
9Tax & shippingfor the whole order--2.00-

Credits Made for Hack Club-Half Life

Parts

19
QtyValueFootprintReferences
11LOGOLOGOG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***
2SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1Conn_01x04_PinImported Parts:Display_128x64_096_I2CJ2
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU2
1RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1~waveshareesp32:Waveshare-ESP32-C3-ZeroU1

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Sunbie FINAL FINAL FINAL smol1 PCB?

It measures 96.3 × 96.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sunbie FINAL FINAL FINAL smol1 use?

19 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sunbie FINAL FINAL FINAL smol1 KiCad files?

From the parv20250-dot/Sunbie repository on GitHub, at the commit this page was made from: the board is sunbie FINAL FINAL FINAL smol1.kicad_pcb and its schematic sunbie FINAL FINAL FINAL smol1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sunbie FINAL FINAL FINAL smol1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask parv20250-dot before reusing the design.