
Flash-32mbit
partlyhuman/floopydrive
The Floopy Drive, an open-source flashcart for Casio Loopy

The Floopy Drive, an open-source flashcart for Casio Loopy
Maskrom adapter is an open-source printed circuit board by partlyhuman, from the partlyhuman/floopydrive repository on GitHub, published under the MIT licence. It is a 2-layer board of 15 × 30 mm with 3 parts on 48 nets, routed with 175 tracks and 32 vias.
It is built around the M29F160FB5AN6F2. Its parts include 2 ICs and 1 resistor. It belongs with the interfaces and adapters boards of this library.
This is a flashcart/devcart for the Casio Loopy.
☕️ Pre-built carts shipping worldwide on loopy.land/shop
To help find your way around:
Related repositories:
None of this would be possible without the contributions of @kasamikona and @kvanderlaag, with many, many additional thanks to the members of the Unloved Budget Computer Hole Discord server.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1K | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | M29F160FB5AN6F2 | LOOPY_M29F160:SOP50P2000X120-48N | IC2 |
| 1 | Maskrom | LOOPY_Cart:LOOPY-SOIC-44 | IC1 |

partlyhuman/floopydrive
The Floopy Drive, an open-source flashcart for Casio Loopy

partlyhuman/floopydrive
The Floopy Drive, an open-source flashcart for Casio Loopy

partlyhuman/floopydrive
The Floopy Drive, an open-source flashcart for Casio Loopy

partlyhuman/floopydrive
The Floopy Drive, an open-source flashcart for Casio Loopy

partlyhuman/qchord
Hardware and Software for the Suzuki Q-Chord


hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️



It measures 15 × 30 mm and has 2 copper layers, 1 mm thick.
3 parts, built around the M29F160FB5AN6F2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the partlyhuman/floopydrive repository on GitHub, at the commit this page was made from: the board is pcb/maskrom-adapter/maskrom-adapter.kicad_pcb and its schematic pcb/cart-connector/cart-connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).