2 layers100 × 105 mm
2 layers152.4 × 139.7 mm
Regulated Dual Polarity Full Wave Power Supply
- Size
- 152.4 × 139.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 10
- Pads
- 122
- Tracks, vias
- 32, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Dec 2016
- Updated
- 2 Nov 2018
Overview
Ps1 is an open-source printed circuit board by paretech, from the paretech/ps1 repository on GitHub. It is a 2-layer board of 152.4 × 139.7 mm with 35 parts on 10 nets, routed with 32 tracks and 0 vias.
It is built around the LM7815ACT. Its parts include 11 capacitors, 7 diodes, 5 resistors, 2 ICs and 2 connectors. It belongs with the power boards of this library.
Main components
1README
README.mdps1.git
ps1 is a dual polarity (+/- 15V) full wave rectified power supply. Schematic capture and PCB layout conducted in KiCad.
Some requirements are in the works over in the wiki.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 8200uF | ps1:C_Radial_D35_L51_P10 | C2, C3, C4, C5 |
| 2 | 1N4004 | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D2, D3 |
| 2 | 1N5822 | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D4, D5 |
| 2 | CONN_01X03 | ps1:Molex_Mini-Fit_JR-5566-03x3x | P1, P2 |
| 2 | LED | LEDs:LED_0805 | D6, D7 |
| 2 | R | Resistors_ThroughHole:Resistor_Ceramic_Horizontal_L23mm-W9mm-H9mm-p30mm | R2, R3 |
| 2 | R | Resistors_SMD:R_0805_HandSoldering | R6, R7 |
| 1 | .33uF | Capacitors_ThroughHole:C_Disc_D7.5_P5 | C6 |
| 1 | 0.1uF | Capacitors_ThroughHole:C_Disc_D7.5_P5 | C8 |
| 1 | 0.1uF | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | C1 |
| 1 | 1uF | Capacitors_ThroughHole:C_Disc_D7.5_P5 | C9 |
| 1 | 2.2uF | Capacitors_ThroughHole:C_Disc_D7.5_P5 | C7 |
| 1 | 20 | Resistors_ThroughHole:Resistor_Horizontal_RM25mm | R1 |
| 1 | 220uF | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C11 |
| 1 | 6A, 400V | ps1:Diode_Bridge_18.5x5.5 | D1 |
| 1 | LM7815ACT | Power_Integrations:TO-220 | U1 |
| 1 | LM7918ACT | Power_Integrations:TO-220 | U2 |
| 1 | SPARE | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C10 |
The 27 most common of 35 parts.
Questions
How big is the Ps1 PCB?
It measures 152.4 × 139.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ps1 use?
35 parts, built around the LM7815ACT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ps1 KiCad files?
From the paretech/ps1 repository on GitHub, at the commit this page was made from: the board is kicad/ps1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ps1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask paretech before reusing the design.
Similar boards
- 2 layers97.2 × 59.1 mm
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
35 parts915 - 2 layers62 × 42 mm
- 2 layers75 × 26 mm
DIY detector electron variant
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
35 parts558BSD-2-Clause - 2 layers45 × 25 mm
ReCamera Basically Board
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
35 parts495Apache-2.0 - 2 layers160.8 × 24.4 mm
- 2 layers75 × 50 mm
- 2 layers50 × 20.5 mm
