2 layers22.2 × 46.4 mm
C64-Switchless Quad Kernal Switcher
bwack/C64-Switchless-Multi-Kernal-27C256-adapter
Kernal switcher for the C64/C64C/C128
14 parts112
2 layers80 × 70 mm
Attiny console
parastuffs/attiny85- Size
- 80 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 17
- Pads
- 74
- Tracks, vias
- 101, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Dec 2024
- Updated
- 1 Dec 2024
Overview
Attiny console is an open-source printed circuit board by parastuffs, from the parastuffs/attiny85 repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 80 × 70 mm with 23 parts on 17 nets, routed with 101 tracks and 0 vias.
It is built around the ATTINY85-20PU. Its parts include 9 resistors, 7 switches, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdattiny85
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R8, R9 |
| 2 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R7 |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | A | custom:button_tactile_silicone | SW6 |
| 1 | ATtiny85-20P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | B | custom:button_tactile_silicone | SW7 |
| 1 | Battery_Cell | Battery:Battery_Panasonic_CR2032-HFN_Horizontal_CircularHoles | BT1 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | DOWN | custom:button_tactile_silicone | SW4 |
| 1 | LEFT | custom:button_tactile_silicone | SW5 |
| 1 | RIGHT | custom:button_tactile_silicone | SW2 |
| 1 | R_Potentiometer | custom:Gear Dial Potentiometer | RV1 |
| 1 | SW_SPDT_321 | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | UP | custom:button_tactile_silicone | SW3 |
| 1 | ~ | custom:OLED_0.96 | U2 |
The 22 most common of 23 parts.
Questions
How big is the Attiny console PCB?
It measures 80 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Attiny console use?
23 parts, built around the ATTINY85-20PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Attiny console KiCad files?
From the parastuffs/attiny85 repository on GitHub, at the commit this page was made from: the board is attiny_console/attiny_console.kicad_pcb and its schematic attiny_console/attiny_console.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Attiny console design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers30.7 × 76.1 mm
Repeater v2
plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.
17 parts95CC0-1.0 - 2 layers101.5 × 54 mm
Simkarte
osmocom/osmocom-analog
Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog
15 parts32GPL-3.0 - 2 layers76.2 × 50.8 mm
Jerboa-8
strickyak/jerboa-attiny85-mod-synth
Modular Synthesizer using an ATtiny85 chip for each module.
23 parts31MIT - 2 layers
- 2 layers55.9 × 55.9 mm
- 2 layers71.1 × 40.6 mm
Tiny blinky
Hack-a-Day/Remoticon_KiCad_Blender
support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop
21 parts22 - 2 layers242 × 60 mm
