4 layers150 × 150 mm
ECP5U85-BSE USB IO Tester
open-ephys/ECP5U85-BSE-USB-IO-Tester
IO Test board for ECP5U85-BSE-USB
96 parts1
2 layers220 × 145.5 mm
PCB Morro Bay
ParadigmHyperloop/testing-hardware1PCBs and other electrical things for Paradigm's post-competition 4 testing efforts
- Size
- 220 × 145.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 347
- Nets
- 209
- Pads
- 1,075
- Tracks, vias
- 2,380, 286
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Feb 2020
- Updated
- 11 Jun 2020
Overview
PCB Morro Bay is an open-source printed circuit board by ParadigmHyperloop, from the ParadigmHyperloop/testing-hardware repository on GitHub. It is a 2-layer board of 220 × 145.5 mm with 347 parts on 209 nets, routed with 2,380 tracks and 286 vias.
It is built around the ATSAMD21J18A-AU, LM2902 and ADS114S08BIPBSR, with the FBMH3216HM221NTV and HI2220P701R-10 among its other parts. Its parts include 123 resistors, 71 capacitors, 38 diodes, 36 connectors and 12 ICs. It belongs with the SAM D and SAM boards of this library.
Main components
5
ATSAMD21J18A-AU
TQFP-64(10x10)-40℃~+85℃ 1.62V~3.6V 10bit 12bit 256KB 32 Bit 32KB 48MHz 52 ARM Cortex-M0+ Built-in FLASH TQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM2902
SOP-14-15V~-1.5V、1.5V~15V -40℃~+125℃ 1.3MHz 2nA 300nA 30uV/℃ 3V~30V 4 400V/ms 40mA 40nV/√Hz@1kHz 700uA 7mV 80dB Built-in compensation SOP-14 Operational Amplifier ROHSSlkorOperational Amplifier
ADS114S08BIPBSR
TQFP-32(5x5)-40℃~+125℃ 100nA 12 16 1LSB 2.7V~5.25V 4.096MHz 4kHz Auto calibration、Built-in temperature sensor、Multiplexers、Power-on reset、Synchronous triggering、Bipolar power supply Built-in Built-in SPI Sigma-Delta Support Yes TQFP-32(5x5) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
FBMH3216HM221NTV
1206-40℃~+125℃ 1 20mΩ 220Ω@100MHz 4A ±30% 1206 Ferrite Beads ROHSTaiyo YudenFerrite BeadsHI2220P701R-10
22201 25mΩ 700Ω@100MHz 2220 Ferrite Beads ROHSLairdFerrite Beads
README
README.mdAll schematics and layouts in KiCad, plus some simulations https://paradigmhyperloop.com
License See the LICENSE for full licensing details.
In summary, (you still need to read the whole thing), these boards are for Paradigm, and Paradigm only. It is shared with the world for the benefit of observers and potential Paradigm team members. If you wish to utilize these designs in any way, you must contact us first and receive written permission to utilize the designs for the purpose you require.
We don't want to be restrictive, and we will almost certainly grant you permission, but we want to know what you are using our designs for, and we want to make sure you are using them correctly and safely.
Parts
347| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C15, C16, C17, C18, C20, C22, C23, C24, C25, C26, C29, C30, C31, C34, C35 +36 |
| 40 | 5015 | TestPoint:TestPoint_Keystone_5015_Micro-Minature | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +24 |
| 34 | 470 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R17, R18, R19, R20, R29, R30, R31, R32, R41, R42, R112, R113, R114, R115, R116, R117 +18 |
| 32 | 100K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10, R12, R14, R16, R22, R24, R26, R28, R34, R36, R38, R40, R106, R107, R108, R109 +16 |
| 32 | 3.3V | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D23, D24, D25 +16 |
| 22 | 51.1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R13, R15, R21, R23, R25, R27, R33, R35, R37, R39, R45, R47, R101, R103, R105 +6 |
| 10 | 205K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R49, R51, R57, R59, R63, R65, R86, R88, R90, R92 |
| 8 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R5, R7, R8, R72 |
| 8 | LM2902 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5, U6, U7, U8, U9, U10, U11, U12 |
| 6 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C28, C32, C40, C41, C66 |
| 6 | 47 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R98, R100, R102, R104, R110, R111 |
| 6 | LED | LED_SMD:LED_0603_1608Metric_Castellated | D21, D22, D35, D36, D37, D38 |
| 4 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R120, R121, R122, R123 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5, C7, C12, C21 |
| 4 | 18pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C10, C11 |
| 4 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R70, R71, R118, R119 |
| 4 | M4 | MountingHole:MountingHole_4.3mm_M4_Pad | H1, H2, H3, H4 |
| 2 | 9pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C13, C14 |
| 1 | 10V_12_1 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J17 |
| 1 | 10V_12_2 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J18 |
| 1 | 10V_12_3 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J19 |
| 1 | 10V_12_4 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J20 |
| 1 | 10V_12_5 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J21 |
| 1 | 10V_12_6 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J22 |
| 1 | 10V_16_1 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J28 |
| 1 | 10V_16_2 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J29 |
| 1 | 10V_16_3 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J30 |
| 1 | 10V_16_4 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J31 |
| 1 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C27 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R73 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C19 |
| 1 | 30MHz | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y2 |
| 1 | 32.768kHz | PCB_Morro_Bay:Crystal_Epson_MC-146 | Y3 |
| 1 | 330nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C33 |
| 1 | 3A | PCB_Morro_Bay:Fuse_Littelfuse_0154003.DR | F1 |
| 1 | 5V_12_1 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J3 |
| 1 | 5V_12_10 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J12 |
| 1 | 5V_12_11 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J13 |
| 1 | 5V_12_12 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J14 |
| 1 | 5V_12_13 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J15 |
| 1 | 5V_12_14 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J16 |
| 1 | 5V_12_2 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J4 |
| 1 | 5V_12_3 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J5 |
| 1 | 5V_12_4 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J6 |
| 1 | 5V_12_5 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J7 |
| 1 | 5V_12_6 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J8 |
| 1 | 5V_12_7 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J9 |
| 1 | 5V_12_8 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J10 |
| 1 | 5V_12_9 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J11 |
| 1 | 5V_16_1 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J24 |
| 1 | 5V_16_2 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J25 |
| 1 | 5V_16_3 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J26 |
| 1 | 5V_16_4 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J27 |
| 1 | 5V_16_5 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J32 |
| 1 | 5V_16_6 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J33 |
| 1 | 5V_16_7 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J34 |
| 1 | 5V_16_8 | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J35 |
| 1 | 620 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R69 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | ADS114S08BIPBSR | Package_QFP:LQFP-32_5x5mm_P0.5mm | U26 |
| 1 | ATSAMD21J18A-AU | Package_QFP:TQFP-64_10x10mm_P0.5mm | U4 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | CAN | PCB_Morro_Bay:Connector_Molex_SL_4POS_0705510038 | J2 |
| 1 | CAN_TERM | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | ESERCOM | PCB_Morro_Bay:Connector_Molex_SL_6POS_0705510005 | J39 |
| 1 | FBMH3216HM221NTV | Inductor_SMD:L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | FB2 |
| 1 | GPIO | PCB_Morro_Bay:Connector_Molex_SL_6POS_0705510005 | J37 |
| 1 | HI2220P701R-10 | PCB_Morro_Bay:Ferrite_Laird_HI2220P701R-10 | FB1 |
| 1 | INPUT_RANGE_SEL_1 | Button_Switch_SMD:SW_DIP_SPSTx10_Slide_6.7x26.96mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 1 | INPUT_RANGE_SEL_2 | Button_Switch_SMD:SW_DIP_SPSTx10_Slide_6.7x26.96mm_W8.61mm_P2.54mm_LowProfile | SW2 |
| 1 | INPUT_RANGE_SEL_3 | Button_Switch_SMD:SW_DIP_SPSTx12_Slide_6.7x32.04mm_W8.61mm_P2.54mm_LowProfile | SW4 |
| 1 | LOGO | PCB_Morro_Bay:HI_Logo | G*** |
| 1 | LOGO | PCB_Morro_Bay:J_Logo | G*** |
| 1 | LOGO | PCB_Morro_Bay:M_Logo | G*** |
| 1 | LOGO | PCB_Morro_Bay:P_Logo_Small | G*** |
| 1 | LOGO | PCB_Morro_Bay:Logo | G*** |
| 1 | LOGO | PCB_Morro_Bay:P_Logo | G*** |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 1 | POWER | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J1 |
The 340 most common of 347 parts.
Questions
How big is the PCB Morro Bay PCB?
It measures 220 × 145.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB Morro Bay use?
347 parts, built around the ATSAMD21J18A-AU, LM2902, ADS114S08BIPBSR and FBMH3216HM221NTV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Morro Bay KiCad files?
From the ParadigmHyperloop/testing-hardware repository on GitHub, at the commit this page was made from: the board is morro-bay/PCB_Morro_Bay/PCB_Morro_Bay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Morro Bay design in my own project?
Its repository states no licence, so its author keeps all rights: ask ParadigmHyperloop before reusing the design.
Similar boards
- 2 layers89.6 × 89.4 mm
- 4 layers30.5 × 82.6 mm
Circuit board design
ImperialSpaceSociety/Project-Mach-1
This is the code and hardware designs for the high powered rocketry project at the Imperial College Space Society
89 parts12 - 2 layers59.5 × 51.5 mm
- 2 layers340.4 × 177.8 mm
- 2 layers60 × 55 mm
- 4 layers76.2 × 101.6 mm
- 4 layers111.9 × 109.5 mm
