2 layers30 × 80 mm
GeneralMCU
ParadigmHyperloop/comp5-electrical
All schematics and layouts in KiCad, plus some simulations https://paradigmhyperloop.com
96 parts4
2 layers196.4 × 70 mm
All schematics and layouts in KiCad, plus some simulations https://paradigmhyperloop.com
- Size
- 196.4 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 153
- Nets
- 118
- Pads
- 528
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Jul 2019
- Updated
- 16 Jul 2020
Overview
BigSur is an open-source printed circuit board by ParadigmHyperloop, from the ParadigmHyperloop/comp5-electrical repository on GitHub. It is a 2-layer board of 196.4 × 70 mm with 153 parts on 118 nets.
It is built around the DRV103H, DRV8806PWP and ACS70331EESATR-2P5U3, with the QTLP651C4TR, XT30PW-M and BAS16LT1G among its other parts. Its parts include 43 resistors, 39 capacitors, 24 diodes, 14 connectors and 12 ICs.
Main components
11
DRV103H
SO-8-40℃~+85℃ 0V~1.2V 2.2V~5.5V 3A 500mΩ 8V~32V Overcurrent Protection SO-8 Relay / Coil Drivers ROHSTexas InstrumentsPower Distribution SwitchesDRV8806PWP
HTSSOP-16-40℃~+85℃ 2A 500mΩ Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Power-on reset Serial Unipolar Drive Yes HTSSOP-16 Stepper Motor Driver ROHSTexas InstrumentsStepper Motor Driver
ACS70331EESATR-2P5U3
QFN-12(3x3)UncategorisedAllegro MicroSystems, LLC
QTLP651C4TR
1206-40℃~+85℃ 10mA 2.1V 20° 35mcd 565nm 570nm Discrete Diode Emerald Green Water Clear 1206 LED Indication - Discrete ROHSEverlight ElectronicsLED Indication - Discrete
XT30PW-M
-- Power connector / plug connector ROHSChangzhou Amass ElecUncategorised
BAS16LT1G
SOT-231 Independent 1.25V@150mA 150mA 1uA 225mW 2A 6ns 75V SOT-23 Switching Diodes ROHSFUXINSEMISwitching DiodesG5LE-1A-VDDC12
插件-25℃~+85℃ 1 Set Normally Open: 1A (SPST NO) 10A 10ms 125V@DC、250V@AC 12V 5ms AgSnO2 插件 Power Relays ROHSOmronPower Relays
NRVTSA4100E
SMA-55℃~+175℃ 1 Independent 100V 150A 4A 680mV@4A 9uA@100V SMA Schottky Diodes ROHSonsemiSchottky DiodesNTS12120EMFST1G
DFN-5(5x6)1 Independent 120V 12A 3.75uA@120V 735mV@12A DFN-5(5x6) Schottky Diodes ROHSonsemiSchottky DiodesTSM900N10CH
-MOSFETsTaiwan SemiconductorNUP2105L
SOT-23-55℃~+150℃ 100nA 2 24V 30pF 32V 350W@8/20us 44V 8A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
README
README.mdcomp5-electrical
All schematics and layouts in KiCad, plus some simulations https://paradigmhyperloop.com
License See the LICENSE for full licensing details.
In summary, (you still need to read the whole thing), these boards are for Paradigm, and Paradigm only. It is shared with the world for the benefit of observers and potential Paradigm team members. If you wish to utilize these designs in any way, you must contact us first and receive written permission to utilize the designs for the purpose you require.
We don't want to be restrictive, and we will almost certainly grant you permission, but we want to know what you are using our designs for, and we want to make sure you are using them correctly and safely.
Parts
153| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C33 +2 |
| 18 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R12, R13, R19, R20, R25, R26, R31, R32, R33, R34, R35, R36, R38, R39, R41 +2 |
| 15 | QTLP651C4TR | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D4, D6, D8, D9, D10, D11, D12, D16, D17, D20, D21, D22, D23, D24 |
| 14 | XT30PW-M | BigSur:AMASS_XT30PW-M | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J12, J14, J15, J16 |
| 13 | 68 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R8, R9, R15, R16, R17, R18, R21, R22, R27, R28, R37 |
| 10 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C7, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 6 | ACS70331EESATR-2P5U3 | BigSur:Allegro_QFN_ACS70331EESATR | U5, U6, U7, U8, U9, U12 |
| 5 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R23, R24, R29, R30, R43 |
| 4 | BAS16LT1G | Package_TO_SOT_SMD:SOT-23_Handsoldering | D14, D15, D18, D19 |
| 4 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C36, C37, C38, C39 |
| 4 | G5LE-1A-VDDC12 | BigSur:OMRON_RELAY_G5LE-1A-VDDC12 | K1, K2, K3, K4 |
| 4 | Hole | MountingHole:MountingHole_4.3mm_M4_Pad | H1, H2, H3, H4 |
| 4 | MMBT3904-7-F | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q3, Q4, Q5, Q6 |
| 4 | R_US | Resistor_SMD:R_1210_3225Metric_Pad1.42x2.65mm_HandSolder | R4, R5, R10, R11 |
| 3 | 5015 | BigSur:Keystone_TP_SMD_5015 | TP1, TP2, TP3 |
| 2 | 10uF | BigSur:VISHAY_CAP_SMD_293D106X9050E2TE3 | C2, C5 |
| 2 | 1uF | BigSur:KEMET_CAP_SMD_T491C105K050AT | C1, C4 |
| 2 | C | Capacitor_SMD:C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C3, C6 |
| 2 | DRV103H | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U1, U2 |
| 2 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | NRVTSA4100E | BigSur:ONSemi_SMD_Schottky_NRVTSA4100E | D1, D5 |
| 2 | NTS12120EMFST1G | BigSur:ONSemi_SMD_Schottky_NTS12120EMFS | D3, D7 |
| 2 | TSM900N10 | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2 |
| 1 | 1.1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R40 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C32 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R42 |
| 1 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14 |
| 1 | 74LVC1G00W5-7 | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | DRV8806 | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U3 |
| 1 | Jumper_NC_Small | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | SB1 |
| 1 | LOGO | Silkscreen:j_logo | G*** |
| 1 | MCP6L02T-E_MS | Package_SO:MSOP-8_3x3mm_P0.65mm | U10 |
| 1 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D13 |
| 1 | SMD46 | GeneralMCU_Example:SMD42-FTP | U4 |
Questions
How big is the BigSur PCB?
It measures 196.4 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BigSur use?
153 parts, built around the DRV103H, DRV8806PWP, ACS70331EESATR-2P5U3 and QTLP651C4TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BigSur KiCad files?
From the ParadigmHyperloop/comp5-electrical repository on GitHub, at the commit this page was made from: the board is BigSur/BigSur.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BigSur design in my own project?
Its repository states no licence, so its author keeps all rights: ask ParadigmHyperloop before reusing the design.
More from ParadigmHyperloop/comp5-electrical
3- 2 layers
GeneralMCU - Old Layout
ParadigmHyperloop/comp5-electrical
All schematics and layouts in KiCad, plus some simulations https://paradigmhyperloop.com
87 parts4 - 2 layers68.6 × 53.3 mm
Meme shield 2019
ParadigmHyperloop/comp5-electrical
All schematics and layouts in KiCad, plus some simulations https://paradigmhyperloop.com
15 parts4
Similar boards
- 4 layers127 × 127 mm
Node
ParadigmHyperloop/electrical
All schematics and layouts in KiCad, plus some simulations
401 parts11 - 2 layers90 × 98.5 mm
IO Board
FREILab/easyVerwaltungHardware
Hardware und Firmware für alle Geräte im Bezug zu easyVerwaltung
77 parts2 - 4 layers110 × 61.8 mm
- 4 layers80 × 80 mm
- 2 layers65 × 56.5 mm
Doorbot
makeitlabs/doorbot
Doorbot is an RFID access control platform, primarily intended for exterior doors in a makerspace environment. Based on Raspberry Pi 3b+, PoE hat, and a custom interface hat.
82 parts2 - 2 layers70.5 × 76.2 mm
PowerDistribution
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
24 parts3Apache-2.0 - 2 layers84.4 × 36.8 mm
Mini pdb
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
25 parts1 - 4 layers61 × 41 mm
