2 layers33.6 × 29 mm
Electronics4kids.nl 0.0.2
pappavis/EasyLab-Arduino-breakoutboards-OUD
Arduino breakout boards vir IOT testing
6 parts
2 layers201.8 × 116.5 mm
Electronics4kids 0.0.1
pappavis/EasyLab-Arduino-breakoutboards-OUDArduino breakout boards vir IOT testing
- Size
- 201.8 × 116.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 37
- Pads
- 142
- Tracks, vias
- 498, 61
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Apr 2018
- Updated
- 5 Apr 2018
Overview
Electronics4kids 0.0.1 is an open-source printed circuit board by pappavis, from the pappavis/EasyLab-Arduino-breakoutboards-OUD repository on GitHub. It is a 2-layer board of 201.8 × 116.5 mm with 33 parts on 37 nets, routed with 498 tracks and 61 vias.
Its parts include 7 resistors, 7 connectors, 7 switches, 3 diodes and 1 IC. It belongs with the home automation and IoT boards and the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
README
electronics4kids.nl 0.0.1/README.mdKiCAD printplaat vir IoT bord
Ontwerp: Michiel Erasmus
Nov-2015
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R1k | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R1, R2, R3, R4, R5, R7 |
| 1 | 4-syfer LED MAX7219 | Displays_7-Segment:Cx56-12 | J5 |
| 1 | Aan_Uit1 | w_switch:switch_100sp5 | SW6 |
| 1 | Aan_Uit2 | w_switch:switch_100sp5 | SW5 |
| 1 | Aan_Uit3 | w_switch:switch_100sp5 | SW4 |
| 1 | Arduino_Nano_V3 | w_conn_misc:arduino_nano_header | J1 |
| 1 | DHT11 Vochtmeting | Pin_Headers:Pin_Header_Angled_1x04 | J7 |
| 1 | ESP-01v090 | ESP8266_MODULE:ESP8266_MODULE | U1 |
| 1 | Gaatje1 | Mounting_Holes:MountingHole_3mm | DR1 |
| 1 | Gaatje2 | Mounting_Holes:MountingHole_3mm | DR2 |
| 1 | Gaatje3 | Mounting_Holes:MountingHole_3mm | DR4 |
| 1 | Gaatje4 | Mounting_Holes:MountingHole_3mm | DR5 |
| 1 | Gaatje5 | Mounting_Holes:MountingHole_3mm | DR3 |
| 1 | HC-SR04 afstandmeter | HC-SR04:HC-SR04 | J2 |
| 1 | HDR_5_Algemeen IO | Pin_Headers:Pin_Header_Straight_1x05 | J4 |
| 1 | I2C LCD 1602 HD44780 | Display:LCD-016N002L | J3 |
| 1 | LED1 | LEDs:LED-5MM | D3 |
| 1 | LED2 | LEDs:LED-5MM | D2 |
| 1 | LED3 | LEDs:LED-5MM | D1 |
| 1 | LOGO | w_logo:Logo_copper_OSHW_6x6mm | G*** |
| 1 | POTmeter | Potentiometers:Potentiometer_Alps-RK163-single_15mm | POTmetertje1 |
| 1 | Pressure sensor | Pin_Headers:Pin_Header_Angled_1x04 | J6 |
| 1 | R10k | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R6 |
| 1 | Sovjet simpits | swartskaap@gmail:LOGO-sovjetSimpits | DR6 |
| 1 | drukknop1 | w_switch:PCB_PUSH | SW1 |
| 1 | drukknop2 | w_switch:PCB_PUSH | SW2 |
| 1 | drukknop3 | w_switch:PCB_PUSH | SW3 |
| 1 | drukknop4 | w_switch:PCB_PUSH | SW7 |
More from pappavis/EasyLab-Arduino-breakoutboards-OUD
1Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
Questions
How big is the Electronics4kids 0.0.1 PCB?
It measures 201.8 × 116.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Electronics4kids 0.0.1 use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Electronics4kids 0.0.1 KiCad files?
From the pappavis/EasyLab-Arduino-breakoutboards-OUD repository on GitHub, at the commit this page was made from: the board is electronics4kids.nl 0.0.1/electronics4kids_0.0.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Electronics4kids 0.0.1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask pappavis before reusing the design.