
MiG21bis hoofstroombrekers 0.0.1
pappavis/Digital-Combat-Simulator-MiG-21bis
DCS: MiG-21bis Arduino KiCAD project

DCS: MiG-21bis Arduino KiCAD project
SRZO Decoder 0.1 is an open-source printed circuit board by pappavis, from the pappavis/Digital-Combat-Simulator-MiG-21bis repository on GitHub. It is a 2-layer board of 65.5 × 29.8 mm with 8 parts on 10 nets, routed with 51 tracks and 4 vias.
Its parts include 4 switches and 2 connectors.
DCS: MiG-21bis KiCAD printed circuitboard designs.
Electronic diagrams for cockpit panels for http://DigitalCombatSimulator.com
by Michiel Erasmus
DCS: MIG-21bis panels by Michiel Erasmus

Contact: thebapodcast@gmail.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | HDR_2_led | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.00mm | J2 |
| 1 | HDR_6_Пушка | Pin_Headers:Pin_Header_Straight_1x06 | J1 |
| 1 | АСП | w_switch:switch_100sp5 | SW2 |
| 1 | Пушка | w_switch:switch_100sp5 | SW1 |
| 1 | СРЗО | w_switch:switch_100sp5 | SW4 |
| 1 | Фотокамеры | w_switch:switch_100sp5 | SW3 |
The 6 most common of 8 parts.

pappavis/Digital-Combat-Simulator-MiG-21bis
DCS: MiG-21bis Arduino KiCAD project

pappavis/Digital-Combat-Simulator-MiG-21bis
DCS: MiG-21bis Arduino KiCAD project


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
It measures 65.5 × 29.8 mm and has 2 copper layers, 1.6 mm thick.
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pappavis/Digital-Combat-Simulator-MiG-21bis repository on GitHub, at the commit this page was made from: the board is regterpaneel/SRZO Decoder/SRZO Decoder 0.1/SRZO Decoder 0.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pappavis before reusing the design.