2 layers63.5 × 48.3 mm
2 layers63.5 × 48.3 mm
Tiny2313 ft232
panticonur/avr1- Size
- 63.5 × 48.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 64
- Pads
- 172
- Tracks, vias
- 336, 65
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Mar 2018
- Updated
- 24 Jul 2022
Overview
Tiny2313 ft232 is an open-source printed circuit board by panticonur, from the panticonur/avr repository on GitHub. It is a 2-layer board of 63.5 × 48.3 mm with 42 parts on 64 nets, routed with 336 tracks and 65 vias.
It is built around the ATTINY2313-20PU, BC337-16 and BSS123, with the BSS84 among its other parts. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATTINY2313-20PU
DIP-20-40℃~+85℃ 128Byte 128Byte 18 2.7V~5.5V 20MHz 2KB 8 Bit AVR Built-in FLASH DIP-20 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BC337-16
TO-92-55℃~+150℃ 100 100MHz 100nA 45V 625mW 700mV 800mA NPN TO-92 Bipolar (BJT) ROHSDIOTECBipolar (BJT)
BSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdavr
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 390 | Discret:R1 | ledR_portD2, ledR_portD3, ledR_portD4, ledR_portD5, ledR_portD6 |
| 4 | CONN_01X08 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | avrP_portB1, avrP_portB2, avrP_portD1, avrP_portD2 |
| 2 | 100n | Capacitors_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | avrC_reset1, vbusC2 |
| 2 | 10k | Discret:R3 | avrR_reset1, ftR_reset2 |
| 2 | 22n | Capacitors_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | quartzC1, quartzC2 |
| 2 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | ftP_usb1, keyP1 |
| 1 | 100n | Capacitors_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | frC1_33 |
| 1 | 15n | Capacitors_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | vbusC1 |
| 1 | 180 | Discret:R1 | ftR_ledTX1 |
| 1 | 22k | Discret:R3 | ftR_amp3V3 |
| 1 | 2N7002 | TO_SOT_Packages_SMD:SOT-23 | key1 |
| 1 | 4.7k | Discret:R1 | ftR_reset1 |
| 1 | 47u | Capacitors_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | vbusC3 |
| 1 | 6.2k | Discret:R1 | ftR_ledRX1 |
| 1 | ATTINY2313-20PU | Housings_DIP:DIP-20_W7.62mm_Socket | AVR1 |
| 1 | BC337-16 | TO_SOT_Packages_THT:TO-92_Inline_Wide | ftQ_amp3V3 |
| 1 | BSS123 | TO_SOT_Packages_SMD:SOT-23 | key2 |
| 1 | BSS84 | TO_SOT_Packages_SMD:SOT-23 | key3 |
| 1 | Button | pnt:push_button | avrBT_reset1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x12_Pitch2.54mm | ftP_common1 |
| 1 | Crystal | Crystals:Resonator-2pin_w8.0mm_h3.5mm | quartzAVR1 |
| 1 | FT232RL_pnt | Housings_DIP:DIP-28_W15.24mm_Socket | FT1 |
| 1 | Ferrite_Bead | Diodes_THT:D_DO-15_P2.54mm_Vertical_AnodeUp | vbusBead1 |
| 1 | Jumper | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | ftJP_reset1 |
| 1 | blue | LEDs:LED_D5.0mm | led_portD3 |
| 1 | blue | LEDs:LED_D3.0mm | ftLED_RX1 |
| 1 | green | LEDs:LED_D5.0mm | led_portD6 |
| 1 | green | LEDs:LED_D3.0mm | ftLED_TX1 |
| 1 | red | LEDs:LED_D5.0mm | led_portD4 |
| 1 | white | LEDs:LED_D5.0mm | led_portD2 |
| 1 | yellow | LEDs:LED_D5.0mm | led_portD5 |
More from panticonur/avr
1Similar boards
- 2 layers300 × 53 mm
BMW E30 Late Cluster SI
Ansel84/BMW-E30-Gauge-Cluster-Late-Model
This project is the documentation of reverse engineering the BMW E30 gauge cluster for post 1988 model years.
118 parts2MIT - 4 layers113 × 93.7 mm
Characterizer
patrickyeon/battery-characterizer
battery tester/characterizer hardware, firmware.
217 parts4 - 2 layers53 × 30 mm
RL78I1C PMOD PROG ADAPTOR ISO
lwray-renesas/RL78-I1C-PMOD-Programming-Adaptor---Isolated
This piece of hardware alows connection between an E2-Lite and any of the RL78/I1C Metering PMOD's. Providing 5kv isolation.
28 parts1MIT - 6 layers100 × 175 mm
V1sch
spartacus-hf/spartacus_PCB_REV1
KiCad schematic and PCB project for the SPARTACUS-HF Chireix transceiver.
438 parts1CERN-OHL-S-2.0 - 2 layers135.4 × 28.4 mm
Moisture Sensor
JakobThiessen/OpenThread_Sensors
Fehler im Schlatplan!!! R7, Q1 und Q2 nicht bestücken. Verbindung von Q1/pin1 zu Q2/Pin2 wie eingezeichnet herstellen und mit GPIO ein und ausschalten.
29 partsMIT - 2 layers
- 4 layers64.5 × 0.1 mm
- 2 layers120 × 100 mm
Questions
How big is the Tiny2313 ft232 PCB?
It measures 63.5 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tiny2313 ft232 use?
42 parts, built around the ATTINY2313-20PU, BC337-16, BSS123 and BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tiny2313 ft232 KiCad files?
From the panticonur/avr repository on GitHub, at the commit this page was made from: the board is hardware/tf1/tiny2313_ft232.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tiny2313 ft232 design in my own project?
Its repository states no licence, so its author keeps all rights: ask panticonur before reusing the design.