2 layers100 × 75 mm
2 layers65 × 57 mm
BarePi TestLed
Panda381/BarePi4Modular Microchip Kit
- Size
- 65 × 57 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 73
- Pads
- 300
- Tracks, vias
- 562, 20
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Jun 2026
- Updated
- 17 Aug 2026
Overview
BarePi TestLed is an open-source printed circuit board by Panda381, from the Panda381/BarePi repository on GitHub. It is a 2-layer board of 65 × 57 mm with 78 parts on 73 nets, routed with 562 tracks and 20 vias.
Its parts include 36 resistors, 36 diodes and 2 connectors.
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 2K2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +19 |
| 1 | 3V3/GND | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D2 |
| 1 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 5V | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D1 |
| 1 | BUS_SCL | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D4 |
| 1 | BUS_SDA | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D3 |
| 1 | I2C_SCL | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D6 |
| 1 | I2C_SDA | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D5 |
| 1 | IN | Raspberry:Raspberry_IN_PinHeader_2x20_P2.54mm_Horizontal | J1 |
| 1 | KEY_A | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D25 |
| 1 | KEY_ALT | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D7 |
| 1 | KEY_B | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D26 |
| 1 | KEY_DOWN | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D8 |
| 1 | KEY_LEFT | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D29 |
| 1 | KEY_RIGHT | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D28 |
| 1 | KEY_UP | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D9 |
| 1 | KEY_X | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D27 |
| 1 | KEY_Y | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D30 |
| 1 | LCD_BL | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D22 |
| 1 | LCD_CS | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D21 |
| 1 | LCD_DC | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D19 |
| 1 | LCD_MOSI | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D23 |
| 1 | LCD_RES | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D20 |
| 1 | LCD_SCK | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D24 |
| 1 | OUT | Raspberry:Raspberry_OUT_PinSocket_2x20_P2.54mm_Horizontal | J2 |
| 1 | PWM_L | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D15 |
| 1 | PWM_R | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D16 |
| 1 | RESET | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D36 |
| 1 | SD_CS | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D31 |
| 1 | SD_MISO | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D32 |
| 1 | SD_MOSI | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D33 |
| 1 | SD_SCLK | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D34 |
| 1 | SPI_CS0 | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D11 |
| 1 | SPI_CS1 | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D10 |
| 1 | SPI_MISO | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D12 |
| 1 | SPI_MOSI | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D13 |
| 1 | SPI_SCLK | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D14 |
| 1 | UART_RX | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D18 |
| 1 | UART_TX | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D17 |
| 1 | USR_LED | Raspberry:Raspberry_LED_Avago_PLCC4_3.2x2.8mm_CW | D35 |
The 74 most common of 78 parts.
Questions
How big is the BarePi TestLed PCB?
It measures 65 × 57 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BarePi TestLed use?
78 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BarePi TestLed KiCad files?
From the Panda381/BarePi repository on GitHub, at the commit this page was made from: the board is TestLed/KiCAD/BarePi_TestLed.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BarePi TestLed design in my own project?
Its repository states no licence, so its author keeps all rights: ask Panda381 before reusing the design.
More from Panda381/BarePi
12- 2 layers65 × 106 mm
- 2 layers65 × 48 mm
- 2 layers65 × 42 mm
- 2 layers65 × 65 mm
- 2 layers65 × 65 mm
- 2 layers80 × 61 mm
- 2 layers90 × 50 mm
- 2 layers65 × 65 mm
- 2 layers65 × 65 mm
- 2 layers65 × 48 mm
- 2 layers65 × 49 mm
Similar boards
- 2 layers57 × 75 mm
- 2 layers68.5 × 34.5 mm
TERES PCB5-KEYBOARD Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
78 parts578Apache-2.0 - 2 layers66.4 × 48.1 mm
- 2 layers38.1 × 19 mm
- 2 layers100 × 50 mm
- 2 layers110.5 × 111.1 mm
Teensy eurorack breakout
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels
78 parts259MIT - 2 layers65 × 56 mm
Keyboard whiz
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
78 parts253GPL-3.0 - 2 layers43.2 × 128.3 mm
