2 layers27.9 × 16.5 mm
2 layers97 × 80 mm
Pcblock v1
palette-system/pcblock1- Size
- 97 × 80 mm
- Copper layers
- 2
- Thickness
- 1.09 mm
- Parts
- 18
- Nets
- 9
- Pads
- 92
- Tracks, vias
- 31, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 27 Sep 2026
- Updated
- 28 Sep 2026
Overview
Pcblock v1 is an open-source printed circuit board by palette-system, from the palette-system/pcblock repository on GitHub, published under the MIT licence. It is a 2-layer board of 97 × 80 mm with 18 parts on 9 nets, routed with 31 tracks and 0 vias.
README
README.mdPCBロック
キーボードのスイッチをソケットもはんだ付けも行わずにPCBに固定する技術です。
2枚のPCBを重ねてスイッチのピンを固定します。
対応スイッチ
- chock V2
フットプリント
ダウンロード
pcblock_v1
ホールサイズ
TOP
BOTTM
ライセンス
個人、商用問わず好き使用して下さい。
コピーライトの表示等も必要ありません。
発生したいかなるトラブルも保証しません。
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | >VALUE | original:XIAO_ESP32S3 | XIAO, XIAO |
The 2 most common of 18 parts.
Questions
How big is the Pcblock v1 PCB?
It measures 97 × 80 mm and has 2 copper layers, 1.09 mm thick.
What parts does the Pcblock v1 use?
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcblock v1 KiCad files?
From the palette-system/pcblock repository on GitHub, at the commit this page was made from: the board is pcblock_v1/pcblock_v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcblock v1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers42.7 × 13.7 mm
Stm32-mini12864
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
18 parts1.1kGPL-3.0 - 2 layers41.2 × 46.6 mm
- 2 layers44 × 51.3 mm
4272MAVcoder R4
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
18 parts915 - 2 layers28.3 × 14.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
18 parts716GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 stepper driver
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
18 parts546MIT - 2 layers
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY V2
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
18 parts515GPL-3.0